• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

A-Arm Grease

fastfraser

fastfraser

Blazing Member
Hi All

I Was at the Totronto Motorcycle show yesterday and they had a naked 2014 RT Spyder :opps: I had a pretty good look at it and I couldn't find any grease fittings on the A-Arms :dontknow: Did I miss something, will the bushings wear out quicker ? I also noticed that the air box will have to come off if you have any hope of getting at the plugs .
 
fastfraser said:
I Was at the Totronto Motorcycle show yesterday and they had a naked 2014 RT Spyder :opps: I had a pretty good look at it and I couldn't find any grease fittings on the A-Arms :dontknow: Did I miss something, will the bushings wear out quicker ? I also noticed that the air box will have to come off if you have any hope of getting at the plugs .
Click to expand...
My reaction was just the opposite when I had all the tupperware off my 2013 RT and saw grease zerks on the suspension. What??? :shocked: :shocked: Grease zerks haven't been used on cars for 30 years! What are they doing on a 21st century motorcycle??????:banghead:
 
No grease for 2014

2013 and 2014 front suspension assemblies.
There appears to be confusion. 2013 on left. 2014 on right.
2013 suspension.JPG2014 suspension.JPG

I wonder if those new bushings will work in my 2013????
 
Last edited:
CanAmKidd said:
I'd like to know if they're any other zerks to look for? Do they require a special grease type?
Click to expand...

Unless the 2014 have changed, all years and models have 8 zerks total on the inside "A" Arms. Any good quality grease from the auto store will work. You will also need to get a 90 degree end for your grease gun to reach the fittings. (I ordered one from Autozone) If you do some searching on this site you will find many threads on greasing these fittings, most of them describing the difficulty of the job. :yikes:
 
is this a planned/unplanned obsolence thing? sealed is good i guess.. if it's done right.. yet.. eventually sealed / unsealed will have to be replaced,, to me , it seems, factory sealed will go out quicker and then extra dollars..to replace.. but what do I know?:dontknow:
 
billybovine said:
No longer on the maintenance schedule for 2014 so I can assume they are no longer there.
Click to expand...

It a different type of bushing as it's listed in BRP parts list and most likely sealed unit. I have a 2011 RS-S that I lube and inspect the rubber on my front bushings every oil change, no big deal.

Mike
 
MikeinGA said:
It a different type of bushing as it's listed in BRP parts list and most likely sealed unit. I have a 2011 RS-S that I lube and inspect the rubber on my front bushings every oil change, no big deal.

Mike
Click to expand...

I know it's a different bushing as I said in post 8. I too grease the a-arm bushings every oil change and they suck to do. When I traded off the 09 they needed to be replaced. So the old bushings (cushions as BRP calls them) don't last long even with lots of grease.
 
jScotD said:
is this a planned/unplanned obsolence thing? sealed is good i guess.. if it's done right.. yet.. eventually sealed / unsealed will have to be replaced,, to me , it seems, factory sealed will go out quicker and then extra dollars..to replace.. but what do I know?:dontknow:
Click to expand...
Sealed suspension bushings on cars last a lot more miles than 95% of Spyders will ever be ridden!:)
 
bushings

looking at the pictures showing the difference in 2013 and 2014

the bushings on the 2013 are a there piece like all the older ones use

the 2014 are a one piece unit looks like they made a change

I wonder if its an upgradeable bushing set we can add to older bikes :pray:
 
ok ... clear.
will wear my glasses sequel .. sorry!, did not look good.
it would be a good solution, .. the zerks is hard to come by
 
There are no grease zerks on the 2014 suspension.

Yippee ... they were really a pain to service on my 2011 RT-S.
 
You must log in or register to reply here.

Similar threads

A
Grease all over the back of my RTL, and I'm thinking, "Where from... ??"
Replies
6
Views
346
askitee
A
V
I'm even more of a Spyder fan than I was before
Replies
15
Views
669
ollicat
O
F
What can I do to get a straight shot at the Rear Tire valve Stem?
2
Replies
31
Views
2K
vito1943
V
L
Red oil drops noticed near left A arm - anyone run across this before?
Replies
3
Views
202
BajaRon
BajaRon
mcalva
Left turn signals don't go on - 2018 F3 Ltd! Any ideas/solution thoughts?
Replies
6
Views
927
mcalva
mcalva
Back
Top