NexVision
New member
So picked up my "08" Spyder GS on 7/27/13. A couple days later dropped it off with Reggy at Tricled and got some mods done..
Automatic Trunk Release
Dynamic driving LED's with dimmer switch
DRL - Daytime running LED's on top and lower suspension arm
DRL - Front Spoiler custom DR
Tricrings in white - Gen 3 continuous white ring
Phone mount - Clutch base plate with, 2" arm and x-grip
12V plug - Mounted on dash
Tricfenderz in white and red with white tip LED replacement
Fuse box FZ - 30amp load with switched relay
Cruise control - 16oz heavy black milled
Side heat management
lower air scoop
Side foam air dam for radiator
Cup holder - mounted on handlebar
Foam handle bar grips
Shock relocator kit
HMF slip on pipe
Picked it up and she was looking oh so beautiful just still wasn't completely right for my likings so after alottttttttttttttttt of browsing and research added a couple more things.
BajaRon Sway Bar
K&N Filter
Juice Box Pro
Now she is dialed in so nice and sweet and runs like a dream :yes::yes: only problem is it is a GS so for long trips I have very minimal storage so I added..
Nelson Rigg tank bag
BRP rear seat bag
both for use only on trips which I am taking my first long one on Thursday heading to Barber.
Just wanted to say thanks for all the info that is shared it helped alot the only problem I ran into is the damn juice box instructions having the injectors mixed up other then that all was very smooth installation especially for me since Reggy did the bulk of it... :doorag:
Pix attached.




Automatic Trunk Release
Dynamic driving LED's with dimmer switch
DRL - Daytime running LED's on top and lower suspension arm
DRL - Front Spoiler custom DR
Tricrings in white - Gen 3 continuous white ring
Phone mount - Clutch base plate with, 2" arm and x-grip
12V plug - Mounted on dash
Tricfenderz in white and red with white tip LED replacement
Fuse box FZ - 30amp load with switched relay
Cruise control - 16oz heavy black milled
Side heat management
lower air scoop
Side foam air dam for radiator
Cup holder - mounted on handlebar
Foam handle bar grips
Shock relocator kit
HMF slip on pipe
Picked it up and she was looking oh so beautiful just still wasn't completely right for my likings so after alottttttttttttttttt of browsing and research added a couple more things.
BajaRon Sway Bar
K&N Filter
Juice Box Pro
Now she is dialed in so nice and sweet and runs like a dream :yes::yes: only problem is it is a GS so for long trips I have very minimal storage so I added..
Nelson Rigg tank bag
BRP rear seat bag
both for use only on trips which I am taking my first long one on Thursday heading to Barber.
Just wanted to say thanks for all the info that is shared it helped alot the only problem I ran into is the damn juice box instructions having the injectors mixed up other then that all was very smooth installation especially for me since Reggy did the bulk of it... :doorag:
Pix attached.




