• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

How are the 2013 models?

COOLMACHINE

COOLMACHINE

New member
Hello Everyone,
Hoping to be getting a new job and if all goes well, will have some more cash coming in. Was wondering what are the thoughts on the 2013 models? I see it is still a 5 speed plus reverse. Was wondering if the spyder still vibrated as much as the older ones did or have they changed the gearing. I used throttle-meisters on my 08, (when I had it) to help keep my hands from falling asleep from the vibration. Looking forward to any responses. Jerry
 
Not sure what you're talking about. I've got an 08 GS SM5. It's one of the smoothest motorcycles (without getting into that debate) that I've ever owned. Only my Honda Valkyrie was smoother. You could stand a nickle up on the valve cover and rev the engine without knocking the nickle over. A V twin can never compete with an opposed 6 so it isn't really a fair comparison.

I've got Dirt Bike grips on my Spyder which have no vibration absorption factor and I've ridden over 1k miles in a day more than once. My hands have been fine.
 
I haven't done any 1K days, but I do have to agree with Ron. My RS could well be the smoothest bike I've had in 35 plus years of riding. Perhaps your individual bike had some issue?
 
I've ridden Harlys for 35 years and compared to them my Spyder RT does not even seem to be running! I could not even tell what time my watch said on the Hog!
 
No debate here. :)

BajaRon said:
Not sure what you're talking about. I've got an 08 GS SM5. It's one of the smoothest motorcycles (without getting into that debate) that I've ever owned. Only my Honda Valkyrie was smoother. You could stand a nickle up on the valve cover and rev the engine without knocking the nickle over. A V twin can never compete with an opposed 6 so it isn't really a fair comparison.

I've got Dirt Bike grips on my Spyder which have no vibration absorption factor and I've ridden over 1k miles in a day more than once. My hands have been fine.
Click to expand...
No Baja...... no debate here. :) Just my personal experience. I do not have the best blood circulation in my hands anyway but from owning 5 bikes including the spyder, it vibrated the most and bothered me. I loved my 08 except for the problems I had with it. Just staying in touch with the spyder riders. . I'd love to get another one with a warranty. It's why I am asking about the new ones. I would probably not buy the new model this year though. I hope to own another one in the future while keeping my current ride. Safe riding everyone.
 
COOLMACHINE said:
No Baja...... no debate here. :) Just my personal experience. I do not have the best blood circulation in my hands anyway but from owning 5 bikes including the spyder, it vibrated the most and bothered me. I loved my 08 except for the problems I had with it. Just staying in touch with the spyder riders. . I'd love to get another one with a warranty. It's why I am asking about the new ones. I would probably not buy the new model this year though. I hope to own another one in the future while keeping my current ride. Safe riding everyone.
Click to expand...

The 'Debate' I was referring to is; 'Spyder is a motorcycle/Spyder is not a motorcycle'. Not whether or not it was bothering your hands. I'll take your word for that.

It could be, as mentioned above, that your particular Spyder vibrated more than most.
 
The numbness in your hands was more likely a result of the seating and arm position than the vibration, although a combination of factors or an unusually strongly vibrating Spyder could have been involved. Changes in the 2013 were mainly in the chassis and suspension, and would not change either your position or the innate vibration, in my opinion. If I were you, I'd try an ST or the luxurious RT as alternatives if you want to join the Spyder ranks again.
 
Owning 3 :spyder2:s, neither one has given me bad vibrations. I love my 2013 RT as much (or maybe more) than my 2010.
My wife LOVES her 2011 RS-S.
Hope you come back to the :spyder2: World!:thumbup:
 
Welcome back.

I have the same kinds of problems and it seems no amount of seating position or bar changes really make it go away. I do have RSI in both wrists so that has a lot to do with it.

Going back and forth from a GS to an ST (I have both now) I notice a significant difference in handlebar vibration. I don't think this is really ST specific, I believe all the 2013's have a lot less handlebar vibration than the older GS models.

Go give one a shot. Test rides are cheap... unless you decide to buy one in which case, Welcome back!
 
I had problems with my hand going numb on my 2008 GS. Throttlemeister helped a ton.
The RT is much smoother, has fly-by-wire throttle so you don't have to twist as hard... And best of all has cruise control. I believe the ST has these options too.
As far as 2013 models, I personally would look for a 2012 RT instead. Many 2013 owners have had various problems.
Good luck and welcome back!
 
Firefly said:
Many 2013 owners have had various problems.
Click to expand...

:hun: Other than the alignment and ball joint issue (and dealers have the service bulletin on it, factory worked the issue on machines built in April onwards), what other problems???:lecturef_smilie:

After I got the ball joints replaced on mine... I like it better than my 2010!
 
I have a 2013 RT-Ltd that I purchased last February. I made sure the dealer replaced the ball joints and did an alignment before I took delivery. My Spyder handles perfectly on the road. When I was in Maggie Valley this past week I had the BajaRon Sway Bar installed by SpyderPops. I tested the sway bar on the Rattler going to Lamont's Barbecue and I'm happy to report that now my RT handles superbly in the corners. My wife even noticed when I took her for a ride when I got back that the Spyder felt more stable.

I now have over 3500 miles on my Spyder with no issues. I'm very happy with my purchase and I'd do it again in a heartbeat!

Go take a test drive, you won't be disappointed!

Tony
 
A few members out here have posted various problems: overheating, limp lode, parking brake issues, alignment and ball joint issues, etc.
maybe those are the exception and not the rule, but I'd still proceed with caution as the RT and ST 2013 models are really 'first year' models with all the changes made.
That being said, I can't stop thinking about that new black colored ST and how great I would look on it.
 
RE: Handlebar vibration on the 2008 GS. I had the same problem with mine when first purchased. I installed the handlebar weights on both the 08 GS and our 09 RS. No more complaints about vibrations.

Prior to purchasing the 2008 GS, I was driving a Kawi Vulcan 2000 cc. The Vulcan handlebars vibrated so much that my hands would go to sleep. My solution was gel gloves--but that only helped a little.

Neither of my two RT's have given me any discomfort with vibration on the handlebars.

RE: The 2013 models. I have not purchased one of these so I cannot offer any personal experience. My suggestion is to read the posts about them, take a test drive, and then make your decision.

Welcome back, and good luck on your hunt.
 
Last edited:
Firefly said:
A few members out here have posted various problems: overheating, limp lode, parking brake issues, alignment and ball joint issues, etc.
Click to expand...

So have previous year's owners...:lecturef_smilie: 2013 has those issues too with the alignment and ball joint issue being only on 2013. What about the throttle body on 12's and below? This list can go on, but lets be realistic here... they are machines and they have their issues just like any other mechanical device!

Firefly said:
maybe those are the exception and not the rule, but I'd still proceed with caution as the RT and ST 2013 models are really 'first year' models with all the changes made.
Click to expand...

These ARE the changes that were made from the first years (2010 and above!)

Firefly said:
That being said, I can't stop thinking about that new black colored ST and how great I would look on it.
Click to expand...

I'll let SomeGuy's comment reflect that one... :roflblack:
 
Here is what happens to any model vehicle.

1- New model has issues that everyone wants addressed
2- Some issues are addressed with permanent fixes, others get band-aids to get the customer back on the road
3- In a new model year all of the issues are addressed with upgrades and improvements
4- People say 'Don't buy this year because of all the changes'. (Changes that everyone was screaming for in the 1st place)
5- Sometimes you just can't win

I think the gremlin this year has been quality control. I've run into this myself. You get the prototype and it's a beautiful piece of craftsmanship so you order a bazillion of them. You start putting them out to the customer and there are issues because the production product was nowhere near what it should have been. I understand that BRP must bear the responsibility to their customer and I believe they have done that very well. I'm sure they are all over their supplier and wishing they had looked at the production parts a bit closer.

To us it's just a ball joint. But to BRP it could have been any of the thousands of parts that go into making a Spyder. Any one of which could fall into the same category without close inspection.

There is no doubt that the 2013 Spyder is much improved over the previous models in many respects, with more potential to take advantage of the aftermarket upgrades that are available.
 
My 2013 RS-S was built the last week of April and has no problems what so ever. No vibration and handles fantastic....Death grip or not. I guess part of that reason could be the dealership....Great place!
 
bullant12 said:
So have previous year's owners...:lecturef_smilie: 2013 has those issues too with the alignment and ball joint issue being only on 2013. What about the throttle body on 12's and below? This list can go on, but lets be realistic here... they are machines and they have their issues just like any other mechanical device!



These ARE the changes that were made from the first years (2010 and above!)



I'll let SomeGuy's comment reflect that one... :roflblack:
Click to expand...


As far as I know, the ball joint issue is unique to 2013 models.
It took BRP 3 years (2010,2011 and 2012) to get the quirks worked out of the RT..... then they go ahead and change a bunch of things......trying to make things better.. but i appears they had some quality control issues, etc....

So I'm just saying I would proceed with caution on a 2013.. in particular the RT.. especially when you can get a deal on a 2012 right now. Just my .02
 
You must log in or register to reply here.

Similar threads

BajaRon
  • Sticky
FAQ's about BajaRon Sway Bar Kits
Replies
9
Views
15K
BajaRon
BajaRon
BajaRon
  • Sticky
DRAFT - New FAQ's about BajaRon Sway Bar Kits Sticky - PLEASE DO NOT POST IN THIS THREAD!
Replies
0
Views
285
BajaRon
BajaRon
shakin_jake
Holiday In The Sun (a shakin_jake trip report)
Replies
3
Views
921
ARtraveler
ARtraveler
I
Can Am Ryker 900 Hard Fact’s - Mike Mas
2 3
Replies
42
Views
37K
chris56
chris56
S
Ryker ride first impressions
Replies
10
Views
3K
Sarge707
Sarge707
Back
Top