• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Checking oil

1. Park the vehicle on a level surface.
2. Remove the LH middle side panel.
Refer to
BODY section.
3. With the engine already at normal
operating temperature, start engine
and let it run for at least 30 seconds.
NOTE:
Running engine for at least
30 seconds allows the suction oil
pump to drain the oil from the engine
crankcase back into the oil tank. Not
carrying out this step could result in
overfilling the engine oil.
4. Stop engine.
5. Unscrew and remove the oil dipstick.
rmr2008-011-100_a
1. Oil dipstick
2. Oil tank
6. Wipe off the dipstick.
7. Reinsert and completely screw in
the dipstick to assure an accurate
reading.
8. Unscrew and remove the dipstick
again.
9. Check the oil level on the dipstick. It
should be near or equal to the upper
mark.

The above is Copyed and pasted Directly from "09 Spyder Owners Manual"

 
Last edited:
1. Park the vehicle on a level surface.
2. Remove the LH middle side panel.
Refer to
BODY section.
3. With the engine already at normal
operating temperature, start engine
and let it run for at least 30 seconds.
NOTE:
Running engine for at least
30 seconds allows the suction oil
pump to drain the oil from the engine
crankcase back into the oil tank. Not
carrying out this step could result in
overfilling the engine oil.
4. Stop engine.
5. Unscrew and remove the oil dipstick.
rmr2008-011-100_a
1. Oil dipstick
2. Oil tank
6. Wipe off the dipstick.
7. Reinsert and completely screw in
the dipstick to assure an accurate
reading.
8. Unscrew and remove the dipstick
again.
9. Check the oil level on the dipstick. It
should be near or equal to the upper
mark.

The above is Copyed and pasted Directly from "09 Spyder Owners Manual"


I hear ya, and thanks.

Once I stop - engine at operating temp - I let it idle before shuting it off. Should do exactaly the same as above without having to restart. Yes?
 
Back
Top