Larger brake pedal needed

[bluestratos]

I think I haved seen a few pictures of a larger break pad/pedel for the RT. Every so often my foot hangs up at the transistion between the painted body panel and the black plastic piece below. I have had 3 near misses now. I think because the pedel is so small I have to keep my foot too close to the body. Can anyone direct me to a supplier?

Thanks,

Randy

 

[BlueKnight]

ISCI makes an aluminum brake pedal replacement that looks bigger..............

http://www.isciride.com/iscirtautoparts.htm

 

[schnauzermom]

Larger Brake Pedal

I am right there with ya!! I pushed down on it with my toe, but not square on like I should be because my toe gets jammed up against the plastic. So a couple of times not able to stop as quickly as I would like.

 

[spyder3]

post from another thread.

Here is another extended brake pad. http://www.esicycleproducts.com/spyd...dalcovers.html

Scroll down, they have 2 sizes. The ESI billet brake pedal is not quite as long as the one we are discussing on here, but it does look nicer. It is longer than the OEM. Having use both of the aftermarket ones, i find that they both work fine and better than the OEM



OEM 2 1/4"
ESI Ext 3 1/4"
Tric led 4 1/4"

 

[ARtraveler]

 

[rcantrell52]

Large Brake Pedal

Contact Reggie or Steve at Tric LED. I had their large brake pedal installed on our RT-S at Spyderfest.
Reese

 

[Questions]

Larger Brake Pedal

I found and bought one for $35 at Tricled.

You have to look under "New Items" ti
find it.

The picture shows the new old at the top
and the factory beneath.

 

[CJ/johnnyg]

Contact Reggie or Steve at Tric LED. I had their large brake pedal installed on our RT-S at Spyderfest.
Reese

I also put it on my RS as a parking break. I kept hitting my ankle because the factory one was way to short. It works great without any problems. BRP needs to take note. Its a safety problem.

 

[Bob Denman]

A very dear friend here "gifted me with the one from TricLED...

 

[bluestratos]

Thanks for the help, I thought it was just me having problems with the peddle.

Regards,

Randy