Need Help Audiovox CCS 100 cruise control

[Lone Spyder Ryder]

I got the Audiovox CCS 100 cruise control installed today. It worked one time I am sure. I am not sure what is wrong. I used the instructions from Hamie but I could not figure out where the Gray wire hooks to the speed sensor? I am totally lost so if anyone out there has or is using one I would sure love some instructions.
Thanks a lot.
Leo :banghead:

 

[Trickie Dick]

Do a search and you will find several links. Here's one: http://www.spyderlovers.com/forums/showthread.php?t=16678&highlight=Audiovox

 

[Lone Spyder Ryder]

Those are the instructions that I used to install but as you can see it says nothing about a speed sensor or where the gray wire goes. I have been all over both this site and SpyderTalk but (could have missed it) not found anything about the speed sensor or gray wire. the one diagram shows the gray wire but don't show where it goes.
thanks for the info and imput.
Leo

 

[Freddy]

That grey wire along with the black (which are connected to the servo loom via coxial cable) are only used when the magnet/coil wheel pickup is used - which you don't on this particular setup. If you have the blue wire connected as shown in that pic and switch 3 to OFF it will read from the coil with switch 7 ON.

The grey wire on the touchpad is only the power supply for the backlight.

 

[reinaldo]

CCS 100

I got the Audiovox CCS 100 cruise control kit installed today. It worked one time I am sure. I am not sure what is wrong. I used the instructions from Hamie but I could not figure out where the Gray wire hooks to the speed sensor? I am totally lost so if anyone out there has or is using one I would sure love some instructions.
Thanks a lot.
Leo :banghead:

I found a good manual for you to fix the problem. Try this valkyrieriders.com/shoptalk/cruise-control.htm and see if it works. I hope you resolve the problem with your cruise control.