How many dzus buttons

[Roger]

do i need if i wanted to do this mod i know they are 14mm right but don't know how many i will need. :spyder2:

 

[SpyderGirl]

do i need if i wanted to do this mod i know they are 14mm right but don't know how many i will need. :spyder2:

There are quite a few, depends on how many you want to do. There are three on each lower side panel (one side should already have them), then there are four each on the black panels above those on either side. There are two holding on the front of the upper center console piece. All of the others are tucked under other panels or under the tail. So I guess you're looking at about 16 of them, or 13 if you figure that the lower left side already has them.

I think that's right.... I'm doing this from memory (I've taken those panels off a gazillon times).

 

[Roger]

If i do it i will probably get 16 sooner or later i will loose one they are 14 mm long but what diameter 3/8, 1/4 or dose it go buy just 14mm.

 

[SpyderGirl]

If i do it i will probably get 16 sooner or later i will loose one they are 14 mm long but what diameter 3/8, 1/4 or dose it go buy just 14mm.

Well that I can't tell you, but I know there is someone that replaced other bolts on the Spyder with the DZUS fasteners.

 

[Roger]

Thanks spydergirl i'am sure someone else will give me the 411 on it.

 

[xpeschon]

Roger --When you get it all worked out (and I wish I could answer your question)this is something that I want to do as well,, so having said that if you could post the link to where you are going to buy them (if its online) and the number needed that would be cool.. I believe we already have the size.. Thank you in advance..

Joe
(X)

 

[Roger]

Hey joe the website is something like kurvygirl.com i will find it again and post but as for buying it i will check this local place by me called FASTENAL to see what they have they might have a website also i will get right back to you on that. hmmmm home depot maybe.:chat:

 

[Roger]

here is a post about them this should help.
http://www.spyderlovers.com/forums/showthread.php?p=53035#post53035

 

[xpeschon]

That will work Roger,, thanks for the info brother....
Joe
(X)