Hey Firefly! Aren't you the "no helmet guy" from Spyders in the Smokies?! :roflblack: :roflblack: :roflblack:
What brand is the white half-helmet?
(sorry...I just couldn't resist!)
You forgot to ask for the helium filled cheek pads. :roflblack:I have had HJC helmets but they feel way to heavy for me. I have a modular flip up Z1R and a 3/4 Z1R and they are more lightweight for me and fit me well. I also have a little shorty that weighs like nothing - which I like the best. If I didn't have so much neck pain I'd be totally into a nice full helmet but I can't ride with one long enough or my neck and shoulders really start to hurt.
You forgot to ask for the helium filled cheek pads. :roflblack:
When I bought my Suzuki GSX-R 750 new in 1986, I was able to get the dealer to throw an Arai helmet into the deal. It was by far the best helmet I have ever worn. I have not taken the time to look for an Arai dealer in this area, but it would probably be a good idea for me to look before I buy another helmet.
Amanda, I like the one that glows in the dark as well. Anything that helps with visibility at night is a good thing. The GMax I have has a red LED light bar on the back with 4 modes, solid, slow flash, rapid flash, and off. I use the solid on at night to help the cars behind me see me better, and realize there is something higher than the tail light in front of them. I will not use the fast flash mode, as I am afraid of throwing someone into a seizure and having them run me over.
:agree:There are sooo many options out there but I can cut through all the hype and tell you exactly which helmet to get with only 2 criteria.
1. Full Face (anything else is just a funny hat)
2. The one that fits your head.
Where should you buy it????
Where ever you can get help with fitment.
If you walk in and say "I want to buy a helmet" and the guy says "They are over there" then that's not the place.
If the guy says "let's see which one fits" and follows you over to help you find it, then when you find it, write the check.
:agree:
Of course, saying that, I am going to be listing my "new" Shark Evoline helmet in the For Sale forum - later today or tomorrow. Great helmet, but the fit is just not right for my head. $150 + shipping. (silver, Medium).
Tom
expensive but worth every dollar.
Remember, "if you have a ten dollar head wear a ten dollar helmet, but if you have a million dollar head or you just want to stay alive wear the best money can buy!"
:agree:Disagree...the technology is virtually the same across the board...you many times pay for a name and for graphics and other gizmos. If a helmet is DOT approved, it's passed the necessary criteria...Snell is no longer needed as the new DOT testing procedures are more encompassing.
See what happens when you give somebody your password so they can post some pics for me.I like the misspelled words also :ani29:But thanks HDX for posting my stuff :cus:rdThis are the best forme you need it two
![]()
I do not agree that DOT standards are more encompassing. It is a different test protocol, that's all, as is the ECE standard. I do agree that any certified full face helmet will offer adequate protection on a motorcycle, cheap or expensive.....if the helmet fits properly! Note that I said "full face" and "motorcycle". On the other hand, the harder shell of the Snell rated helmets, even under their newest, softer standard, provides a level of protection that I feel is crucial to an automobile racer. Too much metal nearby and too much vehicle weight for me to trust anything else for that application. From a "soft stop" standpoint, the ECE standard (not adopted here) seems to be the best at gently protecting the skull while not stopping the head so suddenly that the brain crashes into the skull too violently, a factor that appears to have caused my unconsciousness in my crash a few years back. This discussion could go on for weeks, like octane, or the best seat. The important thing is a good fitting helmet, that is certified, and covers your entire head.....unless there are parts of it you don't care about, of course.Disagree...the technology is virtually the same across the board...you many times pay for a name and for graphics and other gizmos. If a helmet is DOT approved, it's passed the necessary criteria...Snell is no longer needed as the new DOT testing procedures are more encompassing.
I do not agree that DOT standards are more encompassing. It is a different test protocol, that's all, as is the ECE standard. I do agree that any certified full face helmet will offer adequate protection on a motorcycle, cheap or expensive.....if the helmet fits properly! Note that I said "full face" and "motorcycle". On the other hand, the harder shell of the Snell rated helmets, even under their newest, softer standard, provides a level of protection that I feel is crucial to an automobile racer. Too much metal nearby and too much vehicle weight for me to trust anything else for that application. From a "soft stop" standpoint, the ECE standard (not adopted here) seems to be the best at gently protecting the skull while not stopping the head so suddenly that the brain crashes into the skull too violently, a factor that appears to have caused my unconsciousness in my crash a few years back. This discussion could go on for weeks, like octane, or the best seat. The important thing is a good fitting helmet, that is certified, and covers your entire head.....unless there are parts of it you don't care about, of course.![]()