Today I tried navigation via BRP Go (2024+)...

[jdgretz]

Google says:

Well, Google is again, not accurate (no big surprise there, given it's increasing dependence on AI to find answers).

I did however discover where Itineraries are stored!!!!

When you open the app to the main navigation screen you will see a squiggle in the upper left of the screen below the search screen. Click on that and it will show you Itineraries and Completed. Names Itineraries can be found there, brought up to start the ride, edited and again saved. Of course none of this is intuitive or explained by BRP.



Now I only have to get the bike to recognize the phone.

Baby steps.

jdg

 

[MakoShark2]

I can confirm this, I have planned and ridden several itineraries created in BRP Go, they are all there, accessing the map and tapping the icon on the top left (like the picture above). Also from there you can rename, delete, duplicate, or share any previously created itinerary. There's an interesting feature from which you can share the itinerary to a group... Groups are created on the entry screen under social.

But I've seen no possibility to create shaping points, only via points... This means while navigating you get the info for the next via point.

So let's say an itinerary that includes only 3 points: start, middle via point, end... As soon as you start navigating it displays the time and distance to the middle via point. Only after getting there, it will display the distance and ETA to the end... With a middle shaping point instead of a via point I would have the ETA and distance to the end... So to create shaping points, there’s really no other way than creating via points, in order to force the itinerary to pass through them - which isn’t exactly the purpose of a via point, since it’s meant to mark a stop or a waypoint in the route.

But I can honestly see a lot of potential in this application. I know that the ability to map other friends’ Spyders on the map is planned, so you can locate friends and organize group rides. I believe that for this, the GPS module is required - which, as far as I know, was introduced starting in 2025. I sincerely hope that BRP’s engineers invest in this solution (the hardware seems more than capable), since, unfortunately and sadly, I doubt that Android Auto will ever be supported.

 

[RogerC60]

I finally downloaded the app (Android - Pixel 7 Pro if it matters), created the account and added my Spyder by VIN (that actually worked). My software is current and BRP Go has been selected as the navigation software. So far so good. However, the bike will not see the phone when it's plugged in, and yes, I even have a stupid and functionally useless 6" cable for testing. For the life of me, I can't figure out how to get the bike to see the phone. I added a Bluetooth connection just in case, and it appears that the phone is sync'd to the bike.

I'll ask the obvious question, and hope I'm not insulting your intelligence: Is that 6" cable a USB data cable, or is it simply a charging cable? Test it by connecting your phone to a computer with it.

 

[racoon]

I believe that for this, the GPS module is required - which, as far as I know, was introduced starting in 2025. I sincerely hope that BRP’s engineers invest in this solution (the hardware seems more than capable), since, unfortunately and sadly, I doubt that Android Auto will ever be supported.

There was a previous discussion about the BRP plug-in GPS module, but the information on the BRP site was pretty specific that it was for SkiDoo models, not CAN-AM 3-wheelers.

All of the BRP/CAN-AM information I've found about the GPS capabilities of CAN-AM 3-wheelers are either Apple Carplay or more recently BRP GO running on your phone connecting to the BRP Connect software on your bike.

 

[MakoShark2]

There was a previous discussion about the BRP plug-in GPS module, but the information on the BRP site was pretty specific that it was for SkiDoo models, not CAN-AM 3-wheelers.

All of the BRP/CAN-AM information I've found about the GPS capabilities of CAN-AM 3-wheelers are either Apple Carplay or more recently BRP GO running on your phone connecting to the BRP Connect software on your bike.

Just checked it's been listed since 2024.

 

[racoon]

Just checked it's been listed since 2024.

Interesting, as it does say that fits a very long list of Canyon, F3, and RT models starting in 2024.

But I haven't been able to find any information about how to use it on CAN-AM 3-wheelers.
There is a CAN-AM site that talks about using it in the Off Road Vehicles (ORV):

How to Use the ATV & SXS Built-In GPS - Can-Am Off-Road

Uncover the full potential of your Can-Am's cutting-edge GPS system. Learn how to effortlessly navigate and explore with its advanced mapping features.

can-am.brp.com

The built-in GPS is only available on ORV models equipped with the 10.25” display.

 

[MakoShark2]

Interesting, as it does say that fits a very long list of Canyon, F3, and RT models starting in 2024.

But I haven't been able to find any information about how to use it on CAN-AM 3-wheelers.
There is a CAN-AM site that talks about using it in the Off Road Vehicles (ORV):

How to Use the ATV & SXS Built-In GPS - Can-Am Off-Road

Uncover the full potential of your Can-Am's cutting-edge GPS system. Learn how to effortlessly navigate and explore with its advanced mapping features.

can-am.brp.com

From what I've read, it's needed for the "social" features, like group rides/sharing your position with others.

But yes, the off-road vehicles support navigation through a topographic map that is loaded (through wifi) to the unit without any mobile phone connection.

So maybe the on-road navigation (routing) inside the unit (or through a wifi connection) could be planned for a near future...

 

[racoon]

A quick check with Google says that the BRP GO! app allows you to invite other people to a ride you plan, which might require they are also on CAN-AMs using BRP-GO/BRP Connect.

 

[MakoShark2]

A quick check with Google says that the BRP GO! app allows you to invite other people to a ride you plan, which might require they are also on CAN-AMs using BRP-GO/BRP Connect.

I would say, you can't go away without any available network to send and receive each other locations, so it should be either cable or wifi to access the network of the mobile phone.

But then there's this:

Ski-Doo GPS Module With Group Ride

ski-doo-shop.brp.com

• Embedded topographic maps and GPS function included
• Available in the USA, Canada, and Europe
• Enables live location sharing offline for group members and other BRP vehicles around
• Note: Does not show snowmobile trails in Ontario (OFSC), only topographic maps
• Works without a phone connection or cellular network
• Range of 1+ mile (1.6+ km) depending on the terrain
• Standard on 2026 or newer models with the 10.25″ Touch Display, can be installed on 2025 or older models with the same display
• Module must be installed by the dealership

Looks similar to the one listed for the Spyder but part number is different, so offline location sharing and group ride might work differently, being the first very limited in range (1 mile).

 

[AbNormy]

OK, so I may just be stupid at this point, but I'll ask anyway...

I finally downloaded the app (Android - Pixel 7 Pro if it matters), created the account and added my Spyder by VIN (that actually worked). My software is current and BRP Go has been selected as the navigation software. So far so good. However, the bike will not see the phone when it's plugged in, and yes, I even have a stupid and functionally useless 6" cable for testing. For the life of me, I can't figure out how to get the bike to see the phone. I added a Bluetooth connection just in case, and it appears that the phone is sync'd to the bike.

Additionally, unless I'm missing something else (and I hope I am), I don't see any way to save a trip for later use. It appears to me that you plot your trip, plug in the phone and take off. If you close the app, the trip goes away!

I hope I'm missing something, or a lot of somethings. Fortunately, my Garmin Zumo 665 still works just like it should.

jdg

I've got a 665 and Garmin says its no longer supported. I still see the maps, but there's no longer any POI or even fuel stops. How to get that working again? Still on my '14 RT and I drove a new one in Deadwood, but I don't see the attraction. And reading about these horrors with nav and display probs - geez!

 

[racoon]

I've got a 665 and Garmin says its no longer supported. I still see the maps, but there's no longer any POI or even fuel stops. How to get that working again? Still on my '14 RT and I drove a new one in Deadwood, but I don't see the attraction. And reading about these horrors with nav and display probs - geez!

Google says the Garmin Zumo 665 was released in January 2010, so I'm not too surprised that Garmin is no longer providing updates.

The way to get it working again is to sell it on eBay and use the money to help pay for the newest Garmin motorcycle GPS, the Garmin XT3.

 

[racoon]

The Ski-Doo GPS module does not use your cell phone to track the other riders in your group.

Ski-Doo GPS Module With Group Ride

ski-doo-shop.brp.com

On that BRP page it says:

Stay connected on every ride thanks to the GPS module with Group Ride. It enables you to share your location at a 1+ mile (1.6 km) radius, even without a phone connection or cellular network nearby.

I also found this:

How it Works

• • Offline Connectivity: The system uses short-range vehicle-to-vehicle tech (with a range of over 1.6+ km / 1+ mile depending on the terrain) rather than cellular data.
  • Create & Join: One person creates a group, which generates a short join code. Group members navigate to the group/buddy icon on their display, punch in the code, and their friends appear as colored arrows on the map.
  • Other BRP Riders: Even if you aren’t in their group, any other BRP riders with the Group Ride module in your immediate vicinity will show up as black icons.

Notice the "Create & Join" part? You have to invite someone to join your group, and they have to accept the invitation.
But it still tracks other BRP vehicles that have the GPS module, even if they aren't part of your group.

Google thinks it uses a radio signal, which is why the range is limited to about 1 mile.

I also saw a note that said it has to be installed by a dealer as it also requires a BUDS software update.

 

[MakoShark2]

...

I also saw a note that said it has to be installed by a dealer as it also requires a BUDS software update.

Yep, but says it's standard for 2026.

 

[racoon]

Yep, but says it's standard for 2026.

Nice for those that have 2026's, but not so much for the rest of is.

And yes, I'll continue to be an Apple Carplay user.