Thank You

[Cheeseologist]

Bought a new 2019 Spyder RT and through studying this forum I have been able to change oil and mount a new rear tire . Had no problems because of all the good info. Sway Bar next

 

[BLUEKNIGHT911]

Bought a new 2019 Spyder RT and through studying this forum I have been able to change oil and mount a new rear tire . Had no problems because of all the good info. Sway Bar next

:welcome: ... and I compliment you on DIY'ing it ...... Mike :thumbup:

 

[RICZ]

WAY TO GO CHEEZY!!! Same here...this forum has taught me so much about my Spyder that I do all my own maintenance and then some. Great people here.

 

[Little Blue]

Diy

Just curious about changing your rear tire. How long did it take you? Did you do everything? Did you have a tire shop help? .....:thumbup:

 

[ThreeWheels]

Congratulations and welcome.
Is your Spyder new ?
Or just new to you ?
A small caution on the sway bar upgrade.
It's such a popular and virtually essential upgrade, if you purchased a used Spyder, there's a good bet that the sway bar may already be upgraded.
Either way, Happy Farkelling !

 

[Cheeseologist]

took the tire off and my local tire shop mounted a new Kumho and balanced it. probably took me 4 hours. I got nervous when I started it up with all the warning lights that came on for brake issues and ABS but they went out as soon as I started to ride. Hope I can get the Spyder up the 22" needed to install a sway bar. And yes bought it new in Sept 19 , got the end of season 3 grand off.

 

[Saluda]

Congrats & welcome.

 

[ARtraveler]

:welcome: and :congrats: on going ahead with the DIY stuff. Not all of us are willing or able to do it. I envy those who can and do. :firstplace:

 

[Peteoz]

Great post and great job, Cheeseologist. Rear wheel removal is a daunting first task, and you get a real feeling of self achievement when it all comes together at the end :thumbup:

Pete

 

[IdahoMtnSpyder]

Rear wheel removal is a daunting first task,

Not as daunting as getting the d*** thing back on and the belt aligned. At least in my experience! :banghead:

 

[Peteoz]

Not as daunting as getting the d*** thing back on and the belt aligned. At least in my experience! :banghead:

I didn’t find getting it back on to be as daunting due to the instructional videos and advice re taping the adjusters, Idaho. But yes, the reinstall was a bit daunting. I did get the shop to check alignment and tension at next service, and they said it was spot on.....WHAT A FLUKE :thumbup:

Pete

 

[IdahoMtnSpyder]

I didn’t find getting it back on to be as daunting due to the instructional videos and advice re taping the adjusters, Idaho. But yes, the reinstall was a bit daunting. I did get the shop to check alignment and tension at next service, and they said it was spot on.....WHAT A FLUKE :thumbup:

Pete

The problem I had was the axle wanted to walk backwards when I tightened the nut - the direction opposite of what the adjusters prevent! Next time, based on a recent thread, I'll try torquing the axle bolt head rather than the nut. In contrast, the 2013 RT I had presented no such problem.

 

[Peteoz]

The problem I had was the axle wanted to walk backwards when I tightened the nut - the direction opposite of what the adjusters prevent! Next time, based on a recent thread, I'll try torquing the axle bolt head rather than the nut. In contrast, the 2013 RT I had presented no such problem.

Ahhhhhh yes. I did torque the head rather than the bolt after reading a couple of comments on here, Idaho. (Good luck, not good management)

Pete