-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
V.S.S code
- Thread starter dklehman
- Start date
i have had issues with my 600 stalling when stopped. I would get a limp mode message and the engine light would come one (bike doesnt go into limp mode) and then when i stop it would stall. Error was a misfire issue rear cylinder. It has been in the shop 3x and they cant figure it out. Coils and spark plugs changed but still causing errors. Bike is currently in the shop and hopefully they will figure it out soon. Riding season is too short
Chupaca
New member
Interesting....
The VSS warning can come up for a series of reasons. I am sure there are differences in the settings depending on the mode you are in. I have had the VSS pop up for some aggressive manuvers and even on some banked long slow turns. If you have had any front end work like an alignment be sure they reset things with the buds system. Now there is always the glitch where the code pops up and goes away and never comes back. If you shut her down remove the key and let the computers reset then take a similar ryde and see if happens again. :thumbup:
The VSS warning can come up for a series of reasons. I am sure there are differences in the settings depending on the mode you are in. I have had the VSS pop up for some aggressive manuvers and even on some banked long slow turns. If you have had any front end work like an alignment be sure they reset things with the buds system. Now there is always the glitch where the code pops up and goes away and never comes back. If you shut her down remove the key and let the computers reset then take a similar ryde and see if happens again. :thumbup:
Chupaca
New member
Curious as to why it would indicate a rear cylinder as the 600 is a parallel twin. You should get a right left type message. Have not heard of the VSS being involved in this situation but you may not be getting that message with your limp mode. Hopefully they will get it figured out as it seems to be an ignition problem. :thumbup:
Made that mistake myself recently. The engine is inline with the frame so it does indeed have a front and rear cylinder.
Similar threads
