-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Ryker Drink Holder :spyder2:
- Thread starter vstrommer
- Start date
mikeyuberalles
New member
There is the $50 cup holder from providence that mounts down by your right knee.
https://www.providence-spyder-accessories.com/apps/webstore/products/show/7967053
https://www.providence-spyder-accessories.com/apps/webstore/products/show/7967053
graysonsway
New member
To: KID Ryker. How is the Cup Holder from Providence attached? Do I have to get my drill out or does it attach some other way? My wife doesn't have any room on her handle bars with her 600.
bcraig
New member
Might be a good option. I have the sport handlebar which sets lower than stock handlebars, so I would be concerned about clearance. Looks like it has 3 different points the holder attaches to the claw so it might work.
Dragracer
New member
That's the wrong side for me. Can't take a drink while riding. You'd have to release the throttle.
KID Ryker
Member
Remove 2 screws from housing and reuse in same hole. Easy no drilling. That's a rtic 20 oz. with pull top lid.
KID Ryker
Member
Took a test ride almost feels like the water bottle is going to fall out. I think vstrommer ideal is BETTER. Will go with a handle bar mount.
vstrommer
New member
The one I have is from Ram Mounts and it looks to be the only one that is going to hold my 32oz cup decent for now. I tried Lamonster’s but there is not enough clearance to work properly. The Ram works good but not the best looker.
I've been ryding a Ryker with this ^^ type of drink holder.... Bloody Brilliant!
hyea:And IMHO, much better placed than any of the handle bar mounted jobbies I've tried in the past! Quite simply, it works very well; my hand drops readily to that spot making picking the drink container up & putting it back down very easy with no need to take my eyes off wherever we're going or just came from; and yes, it is under my RIGHT hand - but that's no biggie, cos the Ryker is a fun machine made for playing around on back roads & tracks &/or short runs in town - it's not a cruiser or a sportbike where you might expect to be hanging onto the throttle for an hour or more without letting go, it's a great, FUN, 'short blast with lotsa stopping to watch your buddies try the stuff you just did' sorta machine, and the drink holder just inboard & a tad lower'n my right knee is ideally right at hand every time I stop! :thumbup: Still, it does look like it wouldn't be too hard to put it on the left side if you really wanted to... your choice, your ryde - but you did ask! :2thumbs:
Similar threads
