Anyone know what the 'Load Sheeding' circuit/system does?

[Black Pig]

I'm looking to get rid of the stock 'pansy' horn with something a bit more appropriate, however, the horn shares a fuse with the 'Load Shedding' thingummy.

Anyone know what it does or what it's load is so I don't overburden the fuse?

Cheers all.

 

[fencepost]

Contact Reggy at TricLed, he has an F3 air horn that is hidden.

 

[eddieshep999]

I would get a Motorcycle Air horn it comes with a relay
Just wire it up as per instructions and you shoul be good to go

see:-

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/282363851101

Othes are avaiable

 

[Black Pig]

I was thinking about that but I do have a twin horn unit here that is much louder than stock (about 130db) and it only draws 8 amps (only.. HAH!), so if the stock horn is only a couple either side it'll save a whole lot of messing about with additional wiring.

Trying to find the easier route 's'all.

 

[Rattlebars]

I was thinking about that but I do have a twin horn unit here that is much louder than stock (about 130db) and it only draws 8 amps (only.. HAH!), so if the stock horn is only a couple either side it'll save a whole lot of messing about with additional wiring.

Trying to find the easier route 's'all.

If they draw 8 amps, you will need a second relay and I would feed the hot of the new horns +12v straight from the battery. Too, the stock system relay is set up to switch the ground terminal of the stock horn while the +12v is always hot even with the key off. Look to the circuit I have here. Much more info and horny lights too found >HERE<.

 

[ataDude]

If they draw 8 amps... >HERE<.

Hi, Chet! Been a while.

.

 

[Mikey]

I was in Harbor Freight this weekend and I hand a Badboy Horn in my hand reading the info on the package and was wondering if I could make it fit under the skirt of my rt!