Pullback handlebars

[KPDoucette]

We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.

Anybody have any suggestions?

 

[Chupaca]

Little checking..

Check the sponsor vendors here. Look for riesers there are adjustable ones. Some have been able to install RT bars as well....:thumbup:

 

[Warlock]

We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.

Anybody have any suggestions?

I made some for mine. Used 3 1/2 dog bone risers for 7/8 handlebars. The RT handle bars can be mounted, but a adapter plate will have to be made. The 2013 models has no problem adding the RT handle bars.
David

 

[Bob Denman]

Talk to Xpeschon:



He's got pull-backs all figured out! :thumbup:

 

[quasi]

We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.

Anybody have any suggestions?

Value Accessories, a sponsor here, has a set of pullback risers that will reduce the reach by up to 3 1/2 inches.

 

[jtpollock]

We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.

Anybody have any suggestions?

Look at Custom Dynamics I have a 2012 RS-SE5 and I put these on my spyder within the first week I had it they are adjustable to a point they rise up and back there is enough cable to install them my bars are black and the riser are black good luck.:thumbup: jtpollock
just found this Custom Dynamics® Spyder Easy Riser™

 

[BLUEKNIGHT911]

RISERS FOR THE RSS

I sent you a PM explaining what to get and where.................. Mike :bbq:

 

[Warlock]

Look at Custom Dynamics I have a 2012 RS-SE5 and I put these on my spyder within the first week I had it they are adjustable to a point they rise up and back there is enough cable to install them my bars are black and the riser are black good luck.:thumbup: jtpollock
just found this Custom Dynamics® Spyder Easy Riser™

They no longer sell the risers. They still have the instructions. Wanted a set for mine about a year ago and was told by them no longer available.
regards, David

 

[jtpollock]

They no longer sell the risers. They still have the instructions. Wanted a set for mine about a year ago and was told by them no longer available.
regards, David

Bummer I really like mine and they were not that hard to install.:dontknow: jtpollock

 

[sealfloorboards]

When I bought my '09 RS I put Helibar risers on. They raised the bar 5" and brought it back 3". There was just cable enough. I then put a tall windshield on and invented my first Seal Floorboards. I almost felt like I was sitting on a cruiser. You can see a photo on my website. Loved sitting taller and straightener. That's when I became aware of what it means to.......
Ride in comfort.

 

[hungryeye]

I sent you a PM explaining what to get and where.................. Mike :bbq:

How come you couldn't tell all of us?:dontknow:

 

[bscrive]

You can also get the Rivco handlebar risers. 3.5" of pull back.

Here are some on eBay.

http://www.ebay.com/itm/Rivco-Produ...ash=item1ea15f864b:g:kfkAAOSwA3dYN3~4&vxp=mtr

 

[Warlock]

We're looking at a 2012 RSS for my wife whose arms are quite short . She really wants to pull the handlebars back several inches but I see nothing in the aftermarket for this. She recently ran into a couple in Greeley who had setback that replaced the ends of the stock handlebars. She didn't ask where they got them.

Anybody have any suggestions?

Here is what I used on my wife and my bike.
regards, David
http://www.ebay.com/itm/NOS-1970s-D...ash=item4b13baf0f4:g:z7QAAOSwj0NUgK8g&vxp=mtr

 

[Dan-Am]

Maybe here...???

I didn't go through the buying process to see if they really have them, but this site (CA.) has the Custom Dynamics Easy Risers listed for sale:

http://shop.temeculamotorsports.com...duct_2060193.CUSTOM_DYNAMICS_45_EASY_RISE.htm

I recently added them to my 2010 RSS and they work well!

 

[JerryB]

Hi KPDoucette,

Re: Anybody have any suggestions?

See Post #14. I would suggest that you buy these ASAP; they are not making them anymore.

Jerry Baumchen

PS) The 4 1/2" risers are what I have on my '08.

 

[hungryeye]

I didn't go through the buying process to see if they really have them, but this site (CA.) has the Custom Dynamics Easy Risers listed for sale:

http://shop.temeculamotorsports.com...duct_2060193.CUSTOM_DYNAMICS_45_EASY_RISE.htm

I recently added them to my 2010 RSS and they work well!

These are the most compleat kit at lowest price, they are $70 less than Rivco, I like em.
I also like your idea of not cutting the old bar off and using it to mount more junk. :clap::bowdown::yes:

 

[BLUEKNIGHT911]

YOU CAN DO THIS ALSO

These are the most compleat kit at lowest price, they are $70 less than Rivco, I like em.
I also like your idea of not cutting the old bar off and using it to mount more junk. :clap::bowdown::yes:

On the handle bar piece that you add to the " DOG BONE " style just make it One or Both.. slightly longer ...then you can use all sorts off clamp on type devices .................... Mike :thumbup:

 

[Dan-Am]

These are the most compleat kit at lowest price, they are $70 less than Rivco, I like em.
I also like your idea of not cutting the old bar off and using it to mount more junk. :clap::bowdown::yes:

Yes,there is an"art" to mounting junk....or a sickness The original bar piece is in a perfect location for accessories!

 

[Warlock]

I didn't go through the buying process to see if they really have them, but this site (CA.) has the Custom Dynamics Easy Risers listed for sale:

http://shop.temeculamotorsports.com...duct_2060193.CUSTOM_DYNAMICS_45_EASY_RISE.htm

I recently added them to my 2010 RSS and they work well!

Maybe they have some stocked up. Not being made anymore. Don't know why, seems like a good riser.
David

 

[BLUEKNIGHT911]

MAYBE - BECAUSE

Maybe they have some stocked up. Not being made anymore. Don't know why, seems like a good riser.
David

When I bought mine it $25.00 shipped ...... I don't know how they made any money on them considering the workmanship involved ...... jmho ...... Mike :thumbup: