• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

My Spyder wish list

Rawhide kid

New member
Here's my big wish list, in no particular order. I may change the source vendor here or there.

Bell mag 9 Sena, $190, Bell Solid Mag-9 Sena Half Face Motorcycle Helmet - Titanium / X-Large https://www.amazon.com/dp/B00AWRYKXO/ref=cm_sw_r_cp_tai_FFqUybTF6V0H6
Laser alignment, squared away
KOTT grill covers?
Fobobikesales. Tpms set of three silver, $150 https://www.tricledusa.com/_p/prd1/...bo-tpms-for-can-am-spyder-plus-trailer-option
Fuse box, $90, https://www.tricledusa.com/_p/prd1/3704178141/product/fuze-block-fz-1
Vibration dampener, $190, http://dochumphreys.wixsite.com/roadster/ultimate-vibration-damper-products
Turn signal lights,$65, http://www.lamonstergarage.com/rt-f...for-both-mirrors-recommended-for-2014-and-up/
Air filter, bajaron, $35
Bajaron spring tightener, $185
Belt tensioner from doc humprey's, $190, http://dochumphreys.wixsite.com/roadster/ultimate-vibration-damper-products
Tricled rear lights, About $300 for all, https://www.tricledusa.com/_p/prd1/3722200891/product/top-led-light-bar-and-ring-(optional)
And
https://www.tricledusa.com/_p/prd1/...piece-center-"run-brake"-dual-functioning-led
And
https://www.tricledusa.com/_p/prd1/...e-flasher-module-with-plug-&-play-oem-harness
Lamonster led front headlights, $110, http://www.lamonstergarage.com/9005-led-headlight-for-spyder-rt/
Lamonster fog lights, $43, http://www.lamonstergarage.com/lamonster-rt-ultra-bright-led-fog-lights/
F4 windshield: $415, https://f4customs.com/index.php?rou...88_115&product_id=302&sort=p.price&order=DESC
Mirror? $70, http://store.valueaccessories.net/RiderScanBlindSpotMirror.aspx

Grand total around $2,000! I really wish that my birthday, Christmas and Father's Day was closer, for the next 10 years!

Enjoying it all as is though. Just fun to dream and drool a bit.
 
Wow...!!

Nice list....you will be busy..:clap: can save you $190.00...you have the tensioner on there twice :roflblack: and the Knotts I believe you can get from spyderpops...have fun with all that...:thumbup:
 
Have you tried sending this awesome list to the North Pole yet? :dontknow:
:D It couldn't hurt... :D

Happy Shopping!! :thumbup:
 
Just an observation on the Ridescan mirror. Since it looks to be universal it appears to only mount to the windscreen. On the RT with moving windscreen, this may be a problem if you are always adjusting it? TricLED sells a similar mirror with a bracket that you can mount it to the top of the dash so it would remain fixed independent of the windscreen movement. Don't know if TricLEDs mount may work with the Ridescan or just go with the whole TricLED solution? I've been looking at the TricLED mirror myself but my concern is the top dash mount with the ram mount on the bar is not 'solid' I already have the JT bar and ram up there and used it to hold my phone and it was very shaky. Don't know if a shaky mirror would drive me crazy more than help.
 
Dreaming and drooling is good. You got me beat by a lot. We are considering new helmets and communicators this season. We are still using the 2012 versions. :yes:
 
Just an observation on the Ridescan mirror. Since it looks to be universal it appears to only mount to the windscreen. On the RT with moving windscreen, this may be a problem if you are always adjusting it? TricLED sells a similar mirror with a bracket that you can mount it to the top of the dash so it would remain fixed independent of the windscreen movement. Don't know if TricLEDs mount may work with the Ridescan or just go with the whole TricLED solution? I've been looking at the TricLED mirror myself but my concern is the top dash mount with the ram mount on the bar is not 'solid' I already have the JT bar and ram up there and used it to hold my phone and it was very shaky. Don't know if a shaky mirror would drive me crazy more than help.

Good catch on double counting the belt tensioner!

As for above, I just added the top dash mount for a cup holder. Agree, it seems Shakey to me as well, but we will see. I haven't tried it yet. I had intended to get the mirror that attaches to this dash mount via ram mount, so perhaps I put link to wrong one. I've tried the little "stick on" convex mirrors attached to my side mirrors. While I like them on cars, struggling to like them on the spyder. Too much vibration in the mirror perhaps? Not sure. Perhaps the new magnetic mirror mounts would help. Not sure. Stream of thought here.

Yes, I'll keep dreaming and drooling.
 
Thru Phoenix

We go through often. PM a phone number, and as we get closer to one of our trips, I'll call you! Joe
 
Just an observation on the Ridescan mirror. Since it looks to be universal it appears to only mount to the windscreen. On the RT with moving windscreen, this may be a problem if you are always adjusting it? TricLED sells a similar mirror with a bracket that you can mount it to the top of the dash so it would remain fixed independent of the windscreen movement. Don't know if TricLEDs mount may work with the Ridescan or just go with the whole TricLED solution? I've been looking at the TricLED mirror myself but my concern is the top dash mount with the ram mount on the bar is not 'solid' I already have the JT bar and ram up there and used it to hold my phone and it was very shaky. Don't know if a shaky mirror would drive me crazy more than help.

Hello, if you are considering 180-degree mirror riderscan , i would suggest using our dash mount bar, and the whole set up from us.
It comes with custom bracket, so it won't be shaky. We mounted the complete setup , it's easily adjusted but no shake


Sent from my iPhone using Tapatalk
 
Good catch on double counting the belt tensioner!

As for above, I just added the top dash mount for a cup holder. Agree, it seems Shakey to me as well, but we will see. I haven't tried it yet. I had intended to get the mirror that attaches to this dash mount via ram mount, so perhaps I put link to wrong one. I've tried the little "stick on" convex mirrors attached to my side mirrors. While I like them on cars, struggling to like them on the spyder. Too much vibration in the mirror perhaps? Not sure. Perhaps the new magnetic mirror mounts would help. Not sure. Stream of thought here.

Yes, I'll keep dreaming and drooling.

Hi Rawhide, saw some of our products on your wish list! Come see us at the booth.. our RT-F3T will be there with all the lights and accessories so you could see it in person. Thanks for considering our products for your Spyder !


Sent from my iPhone using Tapatalk
 
Back
Top