New Antenna from Spyderpops

[trikermutha]

I must have gotten the last one...:yes:

 

[Bob Denman]

aaaahhhh :yikes: ! sold out already. shipping mine out tuesday[and a couple of
other things]. :yes: irv

Let us know how it works... :congrats:

 

[Bob Denman]

But will Joe be there also? :dontknow:

 

[Cruzr Joe]

Joe can't make it to Spyderquest pps:pps:

 

[Deanna777]

New Antenna

Joe,

I like the new antenna on your spyder.

Deanna

 

[Pampurrs]

Looks good. Wouldn't mind having one myself. I'll look into it.

Thanks!

Pam

 

[irvin48]

Let us know how it works... :congrats:

i dont even use the radio. just think it looks better. turn on the weather
part to see if we will be dry or fubarred. irv

 

[cyclekid58]

Antenna

http://store.valueaccessories.net/ShortSpiralAntenna.aspx

$20.50 from value accessories, plus shipping.

 

[PW2013STL]

Ordered one and already have the shipment notice:yes:

 

[Cruzr Joe]

http://store.valueaccessories.net/ShortSpiralAntenna.aspx

$20.50 from value accessories, plus shipping.

Plus $5.00 shipping, might as well buy from a good sponsor and save .50 cents

Cruzr Joe

 

[billybovine]

Plus $5.00 shipping, might as well buy from a good sponsor and save .50 cents

Cruzr Joe

I hope you're not saying other site sponsors are not good. :shocked:

 

[WEB-WVR]

This is what I got from Harvey


The antenna is a quick change out, using a 7mm open end wrench to get the old one out and then use blue/medium Locktite when you put the new one in. The grommet will slide over the antenna after you get it installed and I installed the adapter in the antenna first using the 3mm socket to tighten it all the way then screwed the assembly into the hole on the Spyder.

The grommet seems to be a little hard to get it snapped into place but if you push in the bottom first then you can use more force to push in the top. It really fits tight and flush. I installed 4 yesterday and everyone was very happy with it.,

So...you did not need to get to the underside of the tupperware ? Thanks !

 

[Cruzr Joe]

I hope you're not saying other site sponsors are not good. :shocked:

My Bad ............. Did not know that value accessories was a sponsor. I looked at our sponsor list and now i know.

Cruzr Joe

 

[MikeT]

HEY, that other nickel was my commission :roflblack::roflblack::roflblack::roflblack:.

Cruzr Joe

Da KING is due his recompence. ALL HAIL da KING:bowdown::bowdown::bowdown::bowdown::bowdown:

 

[Bob Denman]

https://youtu.be/StJS51d1Fzg

 

[ARtraveler]

Alaska...alone and forgotten.






:roflblack::roflblack::roflblack:

 

[trikermutha]

So...you did not need to get to the underside of the tupperware ? Thanks !

More instructions I got off another site..Pretty Simple :thumbup:


[FONT=Calibri,Bold][FONT=Calibri,Bold]SPYDER RT:
[/FONT][/FONT][FONT=Calibri,Bold][FONT=Calibri,Bold][/FONT][/FONT]1. REMOVE THE OEM ANTENNA BY FIRST PULLING UP ON THE RUBBER BOOT AT THE BASE OF THE ANTENNA.
2. USING A SMALL LOCKING PLIERS GRIP THE BOTTOM BRASS PIECE ON THE ANTENNA AND TURN LEFT TO REMOVE.
3. CLEAN THE FLAT SURFACE AROUND THE THREADED HOLE WITH A CLEAN RAG AND RUBBING ALCOHOL AND LET DRY. SEE FIG. 1.
4. TAKE THE NEW RUBBER GROMMET FROM THE PACKAGE AND PUSH IT INTO THE HOLE ON THE BODY PANEL AS SHOWN IN FIG. 2.
5. REMOVE THE SET SCREW FROM THE PACKAGE AND CLEAN THE THREADS WITH RUBBING ALCOHOL. LET DRY.
6. PUT A SMALL DROP OF REMOVABLE THREAD LOCK ON THE THREAD NEAR THE END OPPOSITE OF THE HEX SOCKET.
7. INSTALL THE SET SCREW INTO THE ANTENNA MAST AND TIGHTEN WITH A 3MM ALLEN WRENCH. SEE FIG. 3.
8. PUT A SMALL DROP OF REMOVABLE THREAD LOCK ON THE EXPOSED THREADS OF THE SET SCREW.
9. CAREFULLY INSERT THE MAST THROUGH THE HOLE IN THE GROMMET AND THREAD IT INTO THE THREADS IN THE SPYDER. SEE FIG. 4. HAND TIGHTEN.
10. YOU MAY NEED TO SLIGHTLY ROTATE THE GROMMET AS YOU ALIGN THE SET SCREW WITH THE THREADS IN THE SPYDER.

 

[TheCajun1957]

Ordered an antenna yesterday along with an air horn. Order status is Awaiting fulfillment. Guess he ran out?

 

[Cruzr Joe]

Ordered an antenna yesterday along with an air horn. Order status is Awaiting fulfillment. Guess he ran out?

He will ship them out Tuesday he said. new shipment will be in Tuesday Morning


Cruzr Joe

 

[trikermutha]

Looks like I will have Mine Friday hyea: