Need Freedom Trailer Help

[View from behind]

As we went to connect our Freedom trailer for the first time we discovered that the trailer connector is not long enough to connect to the connector on the Spyder. Anybody else have this problem and if so what was the solution? Thank God we didn't have to take the trailer with us today.

 

[Cruzr Joe]

As we went to connect our Freedom trailer for the first time we discovered that the trailer connector is not long enough to connect to the connector on the Spyder. Anybody else have this problem and if so what was the solution? Thank God we didn't have to take the trailer with us today.

just go buy another connector (both sides) and after you wire it together, use it like an extension cord, probably $20.00 expense.

Or check and see if there is extra wire under the tupperware.

Cruzr Joe

 

[View from behind]

just go buy another connector (both sides) and after you wire it together, use it like an extension cord, probably $20.00 expense.

Or check and see if there is extra wire under the tupperware.

Cruzr Joe

Joe,

Did you have to make an extension for yours to reach?

 

[View from behind]

Anyone else have this trailer?

 

[wwshrum]

I had the same thing happen, there is enough wire to reach if you look where the wire is attached to the tongue and loosen it and pull the wire though.

 

[JLOLMO]

I had the same issue. I took the front tip off of the trailer (remove 4 bolts) and there was extra wire that I was able to pull. The other problem was how the dealership mounted the pigtail. It was wired in a way that did not allow all of the intended slack to be used. If the dealership installed it for you, let them deal with it.

 

[View from behind]

Thank you to all that took the time to reply.