Ordered today at lunch, already on its way along with some other goodies i picked up.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
F3 Fog Light Kit--Thank You LaMonster Garage
- Thread starter David Ortiz
- Start date
CharlieIndia
New member
fog lights
Placed my order today!:yes:
hyea:Arrived a few days later, pretty easy to install. Work great! They can be seen on a bright sunny day better than the stock headlights. BRP needs to be thinking LED's.
Placed my order today!:yes:
hyea:Arrived a few days later, pretty easy to install. Work great! They can be seen on a bright sunny day better than the stock headlights. BRP needs to be thinking LED's.
Last edited:
Does anyone have the instructions for the fog light kit?
I bought a demo 2015 F3-S, and the fog lights were removed, but they forgot to remove the fog light switch. And I was wondering if I could use the original wiring and install a set of my own. So with that in mind I was wondering if anyone had an original set of instructions for the install?
Thanks
2faston3
I bought a demo 2015 F3-S, and the fog lights were removed, but they forgot to remove the fog light switch. And I was wondering if I could use the original wiring and install a set of my own. So with that in mind I was wondering if anyone had an original set of instructions for the install?
Thanks
2faston3
armyspydervet
Member
Just ordered mine. Thanks for the info in this post.
Lamonster
SpyderLovers Founder
We just put 17 more kits together this weekend and that's all that's left till the rest of the switches come it. We should have good stock for Spyderfest and we will be doing installs there. :doorag:
http://www.lamonstergarage.com/lamonster-f3-led-fog-light-kit/
armyspydervet
Member
Ordered mine yesterday. Thanks for the hard work!!!
armyspydervet
Member
What did you do to get the wire off the plastic circle? I watched Lamont's video and for the life of me can't get it detached. I'm afraid I will eventually rip the wire out.
Lamonster
SpyderLovers Founder
There is a release right in the middle of the plug.
armyspydervet
Member
Thanks. I will try it again when the light come in.
Attachments
CA Railwhale
New member
trim rings
I just installed my fog lights yesterday; other than dropping a plastic rivet and losing it inside the bike, it took about forty minutes. Now I have to wait two weeks for a replacement rivet to ship from Quebec. They are a great product and the installation video helped. One question though, other than the LED rings, do you know of anything to trim out the installation? Right now I'm considering modifying the blanks for a more "custom" and clean look around the fog lights. Perhaps you could develop a pattern for others to do the same thing since the "blanks just get thrown away.
I just installed my fog lights yesterday; other than dropping a plastic rivet and losing it inside the bike, it took about forty minutes. Now I have to wait two weeks for a replacement rivet to ship from Quebec. They are a great product and the installation video helped. One question though, other than the LED rings, do you know of anything to trim out the installation? Right now I'm considering modifying the blanks for a more "custom" and clean look around the fog lights. Perhaps you could develop a pattern for others to do the same thing since the "blanks just get thrown away.
CA Railwhale
New member
If you release the blank plate from the mount, you can pull the entire thing out into the open and easily see the catch.
CA Railwhale
New member
oops
Well I took the blanks, and used a 2 1/4" holesaw to cut holes in them, went a little large to allow airflow to cool the lights. First one came out perfectly, broke the second one. I guess now, it's order the parts from Quebec. For some reason they call them heatshields. They are already cut out for the stock fog lights, so modifying them to fit the Lamonster ones should be easy plus they are fairly cheap at less than ten bucks each.
Well I took the blanks, and used a 2 1/4" holesaw to cut holes in them, went a little large to allow airflow to cool the lights. First one came out perfectly, broke the second one. I guess now, it's order the parts from Quebec. For some reason they call them heatshields. They are already cut out for the stock fog lights, so modifying them to fit the Lamonster ones should be easy plus they are fairly cheap at less than ten bucks each.
Similar threads
