-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Heated jacket
- Thread starter hocklaw61
- Start date
Bike-O-Din
New member
Maybe
If you use a direct wiring to the battery for the jacket, the harness provided by the jacket mfg will have the appropriate fuse inline. (Gerbing provides a chart that shows which value fuse to use depending upon how much gear you are powering from the harness and the fuses to put in the holder.) If you are tapping into an existing circuit on the bike, then you may have to change the fuse - however, this method is not recommended so you will not overload the bike circuits.
It is important to note that you should not tap into a circuit on the bike that has fuses higher than what you need for the jacket without adding an additional inline fuse of the proper amperage for the jacket.
Have fun.
If you use a direct wiring to the battery for the jacket, the harness provided by the jacket mfg will have the appropriate fuse inline. (Gerbing provides a chart that shows which value fuse to use depending upon how much gear you are powering from the harness and the fuses to put in the holder.) If you are tapping into an existing circuit on the bike, then you may have to change the fuse - however, this method is not recommended so you will not overload the bike circuits.
It is important to note that you should not tap into a circuit on the bike that has fuses higher than what you need for the jacket without adding an additional inline fuse of the proper amperage for the jacket.
Have fun.
It is Gerbing harness to the battery. It does provide fuses. Which fuse do I change ? Or is it add? Thanks
jaherbst
New member
It is an inline fuse holder already in the harness. Should already be a 10a fuse installed. Check it. if not put in the provided 10a fuse. 15a if you are using pants and or gloves.
Jack
Similar threads
