Results 1 to 23 of 23
  1. #1
    Registered Users
    Join Date
    Jun 2016
    Location
    Austin, TX
    Posts
    1
    Spyder Garage
    0

    Default Phone mount for ST?

    Hey all,

    New to the forums here, been riding spyders for a while though. Love my RS-S.

    Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-8...er+phone+mount

    Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

    Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome.

  2. #2
    SpyderLovers Founder Lamonster's Avatar
    Join Date
    Aug 2007
    Location
    Springfield, MO
    Posts
    15,751
    Spyder Garage
    0

    Default

    Welcome.

    This works on the RT and ST and provides power for charging.
    http://www.lamonstergarage.com/lamon...t-with-x-grip/

  3. #3
    Very Active Member
    Join Date
    Aug 2012
    Location
    CO
    Posts
    1,664
    Spyder Garage
    1

    Default

    +1 on the Ram X grip and compatible socket arm. http://www.rammount.com/part/RAM-HOL-UN7BU
    When life throws you curves, aim for the apex
    Current stable: 08 Spyder RS "Big Bird" \ 12 Street TripleR "Stripper" \ 02 VFR800 "Big Red" \ 09 KLX250S
    Sold List: 97 Ninja500R, 03 SV650K3, 01 Ducati 750Sport Dark, 73 CB350/4, 03 F650GSA, 08 Gixxer600, 03 Gixxer600, 91 VFR750F, 09 KLX250, 06 Thruxton 900
    JLohPhotos
    ... Motorcycles are kind of like Baskin Robbins... You're looking at 31 flavors of ice cream, don't you kind of want to know what they all taste like?...

  4. #4
    Registered Users
    Join Date
    Aug 2013
    Location
    Fountain Hill, PA
    Posts
    30
    Spyder Garage
    0

    Default

    I have a factory installed Garmin GPS on my St-LTD. where would I install the ram mount on my handlebar and which model of the RAM mount would work?


    Sent from my iPhone using Tapatalk

  5. #5
    Member SpyDnAZ's Avatar
    Join Date
    Jun 2015
    Location
    Tucson
    Posts
    29
    Spyder Garage
    0

    Default I have this on my ST-S

    The part number for the Yoke Clamp, now a handlebar clamp for the Spyder ST is RAM-B-108B or RAM-B-108B-STRAP40U, depending on how the website chooses to identify the part. A (somewhat out of focus) picture (from the rear) of one of these clamps mounted on my 2013 Spyder ST is included below:

  6. #6
    Active Member
    Join Date
    Jun 2016
    Location
    US
    Posts
    32
    Spyder Garage
    0

    Default

    Quote Originally Posted by hestonkent View Post
    Hey all,

    New to the forums here, been riding spyders for a while though. Love my RS-S.

    Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-8...er+phone+mount

    Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

    Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome.
    I was looking at that same one lol I just got my can am this pass weekend a 2014 sts and i can't find anything for this bike

    Sent from my SM-N910T using Tapatalk

  7. #7
    Registered Users
    Join Date
    Aug 2013
    Location
    Fountain Hill, PA
    Posts
    30
    Spyder Garage
    0

    Default

    Quote Originally Posted by SpyDnAZ View Post
    The part number for the Yoke Clamp, now a handlebar clamp for the Spyder ST is RAM-B-108B or RAM-B-108B-STRAP40U, depending on how the website chooses to identify the part. A (somewhat out of focus) picture (from the rear) of one of these clamps mounted on my 2013 Spyder ST is included below:
    Ok. Thank you. I'll look into this one.


    Sent from my iPhone using Tapatalk

  8. #8
    Registered Users
    Join Date
    Jun 2015
    Location
    Arizona United States
    Posts
    8
    Spyder Garage
    0

    Default

    I used my old mount from my 2013 RT-S and put on my son RS with no problem

    Sent from my SM-G928T using Tapatalk

  9. #9
    Very Active Member Flamewinger's Avatar
    Join Date
    Aug 2013
    Location
    SF Bay Area
    Posts
    1,165
    Spyder Garage
    1

    Default

    I got a Rivco drink holder mount (no cup holder) and with some RAM parts and RAM X-grip. Mounting phone or GPS works great.




    Sent from my iPhone using Tapatalk

    Susie - 2013 Spyder ST-Ltd
    Flame Red '04 GL1800
    '97 GL1500
    '95 GL1500
    '89 GL1500
    '83 GL1100

    Susie - 2018 RT-Limited with 8400 miles so far . . .
    '13 Spyder ST-L with 21k miles
    '04 GL1800 with 91k miles
    '97 GL1500 with 87k miles
    '95 GL1500 with 102k miles
    '89 GL1500 with 96k miles
    '83 GL1100 with 117k miles
    [/COLOR]'81 Honda Silverwing with 36k miles
    '79 Kaw 400LTD with 26k miles
    GWRRA - 39 yrs - Life Member
    AMA - 39 yrs
    Just remember, if common sense is so common, why do few people have it?

  10. #10
    Registered Users
    Join Date
    Aug 2013
    Location
    Fountain Hill, PA
    Posts
    30
    Spyder Garage
    0

    Default

    Quote Originally Posted by Evgarriga. View Post
    Ok. Thank you. I'll look into this one.


    Sent from my iPhone using Tapatalk
    I ended up buying this RAM mount and it worked great!


    Sent from my iPhone using Tapatalk

  11. #11
    Very Active Member AY4B's Avatar
    Join Date
    Aug 2014
    Location
    Greenville Tx
    Posts
    2,248
    Spyder Garage
    1

    Default

    Here is a thread on how I did it adding the ball mount to my Butler Drink holder. http://www.spyderlovers.com/forums/s...r-Drink-Holder
    2017 F3 Limited

  12. #12
    Active Member
    Join Date
    Dec 2013
    Location
    Oxford, GA
    Posts
    113
    Spyder Garage
    0

    Default

    Quote Originally Posted by Evgarriga. View Post
    Ok. Thank you. I'll look into this one.


    Sent from my iPhone using Tapatalk
    I just installed this one on my wife's STL.
    Attached Images Attached Images

  13. #13
    Registered Users
    Join Date
    Aug 2013
    Location
    Fountain Hill, PA
    Posts
    30
    Spyder Garage
    0

    Default

    Quote Originally Posted by DDT View Post
    I just installed this one on my wife's STL.
    Actually that is the one I ended up installing.


    Sent from my iPhone using Tapatalk

  14. #14
    Registered Users
    Join Date
    May 2016
    Location
    Santa Maria
    Posts
    5
    Spyder Garage
    0

    Default GPS Mount...

    Quote Originally Posted by hestonkent View Post
    Hey all,

    New to the forums here, been riding spyders for a while though. Love my RS-S.

    Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-8...er+phone+mount

    Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

    Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome.
    I'm very happy with this one on my RSS... https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 ... I had to go with a longer clamp screw, but I like the fact that the tether doesn't block the screen and it is rock solid... David

  15. #15
    Registered Users
    Join Date
    Jul 2015
    Location
    Mansfield, Ohio
    Posts
    8
    Spyder Garage
    0

    Default

    Anything you buy from Lamonster is worth every penny and comes highly recommended. I didn't know about their mount when I bought mine so I pieced mine together from value accessories (sponsored link)

  16. #16
    Active Member
    Join Date
    Jun 2016
    Location
    US
    Posts
    32
    Spyder Garage
    0

    Default

    http://www.lamonstergarage.com/handlebar-2/

    Sent from my SM-N910T using Tapatalk

  17. #17
    Active Member
    Join Date
    Jun 2016
    Location
    US
    Posts
    32
    Spyder Garage
    0

    Default

    That where they have the st phone mount

    Sent from my SM-N910T using Tapatalk

  18. #18
    Very Active Member Flamewinger's Avatar
    Join Date
    Aug 2013
    Location
    SF Bay Area
    Posts
    1,165
    Spyder Garage
    1

    Default

    I wouldn't trust any magnetic holder with my $$$ phone.

    I use RAM mounts.

    This might work on the handlebar.
    https://m.summitracing.com/parts/rmi...WMgRoCdkbw_wcB

    I use a Ram adhesive base with 1" ball along with short arm and X-grip. I have it stuck to the inside of the windshield and with some furniture felt padding, the arm and x-grip rest on the dash so it doesn't bounce around. Two safety straps from each windshield brackets to the base of the x-grip just in case something gets loose.




    Sent from my iPhone using Tapatalk

    Susie - 2013 Spyder ST-Ltd
    Flame Red '04 GL1800
    '97 GL1500
    '95 GL1500
    '89 GL1500
    '83 GL1100

    Susie - 2018 RT-Limited with 8400 miles so far . . .
    '13 Spyder ST-L with 21k miles
    '04 GL1800 with 91k miles
    '97 GL1500 with 87k miles
    '95 GL1500 with 102k miles
    '89 GL1500 with 96k miles
    '83 GL1100 with 117k miles
    [/COLOR]'81 Honda Silverwing with 36k miles
    '79 Kaw 400LTD with 26k miles
    GWRRA - 39 yrs - Life Member
    AMA - 39 yrs
    Just remember, if common sense is so common, why do few people have it?

  19. #19
    Active Member Don K's Avatar
    Join Date
    Oct 2015
    Location
    Bedford Virginia
    Posts
    81
    Spyder Garage
    0

    Default

    Quote Originally Posted by hestonkent View Post
    Hey all,

    New to the forums here, been riding spyders for a while though. Love my RS-S.

    Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-8...er+phone+mount

    Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

    Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome.
    Go to Leader motorcycle.com
    This is where I got mine for my RT.
    They have them for all models. Quality products made I USA.
    Hope this is helpful.

  20. #20
    Member
    Join Date
    Nov 2015
    Location
    Goodyear AZ
    Posts
    2
    Spyder Garage
    0

    Angry phone mount

    My wife has a 2014 st-s, she had the clamp mount for about 2 years and it worked great. Then one day last month the mode button would not work, So could not started. Sdyder had to be towed to dealer and they found the clamp had pinched the wires in handle bar. Long story short, the whole mode assembly had to be replaced at a cost of 800 dollars. I found a great web site with all kinds of ram mounts { Providence spyder.com } . So all of you using the camp mount check make sure wires are not being pinched. Wires are very thin.

  21. #21
    Active Member
    Join Date
    Oct 2016
    Location
    APPLE VALLEY, MINNESOTA.
    Posts
    46
    Spyder Garage
    0

    Default LAMONSTER GARAGE has you covered

    This is the new Spyder Cuff, water bottle holder, phone holder, power port for the ST.

    http://www.lamonstergarage.com/lamon...-x-grip-combo/

    http://www.lamonstergarage.com/lamon...-x-grip-combo/

    depending on your phone size. T.P.

  22. #22
    Very Active Member JimVonBaden's Avatar
    Join Date
    Oct 2016
    Location
    NoVA
    Posts
    608
    Spyder Garage
    0

    Default

    This was on mine. I modified it to work with my standard Garmin mount.


    Jim

    2013 ST-S (wife's)
    2015 BMW R1200GS (mine)
    1981 Yamaha XS400 Scrambler Custom (mine)

  23. #23
    Member Tangzilla's Avatar
    Join Date
    Feb 2019
    Location
    Forests of SE Ohio
    Posts
    6
    Spyder Garage
    0

    Default

    Thanks for validating this solution for me.

    I get around. . .Ironbutnik

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •