-
magical member
I rode upto Laconia today with mastertek2000 and his wife, got to see the trunk first hand, very impressive. Rock solid and done very well, placed aerodynamicly behind the saddle backs, heat shielding from exhaust.
Really handy trunk, sometimes a trailers just too much and you just want that little bit of extra room, this fits the bill perfectly.
Nice, clean professional looking job.
Harry
"Draco dormiens nunquam titillandus"
My Rides;
Nimbus 2000, Ford Anglia, 2012 Spyder RT Limited, Pre 14 Vintage Classic Collectors Edition!
Favorite Ride;
Nimbus 2000 boy this thing can fly.
Mods:
Charm of invisibility, Reparo Charm (cuts down on service cost)
One always wonders about roads not taken.
-
Very Active Member
i took everything apart yesterday all looked fine will put it back together hope to get another 200 or 300 miles on it before 2500 mile trip in July
-
Teddys favorite human
-
Very Active Member
Well put about 1000 miles one the spyder with rear trunk installed took it apart everything looks fine in 9 days will start our 2000 plus ride
-
Well we can't wait to see the long-distance test reports! Good Luck; have a safe and fun trip!
-
Very Active Member
-
Very Active Member
Rewaco RF-1 GT
Inline 4 cylinder Ford Zetec with multi-port fuel inject, 140 HP
0-60mph: 5.8 seconds
5 speed sync manual with reverse, mechanical dry clutch.
Front suspension: Trapezoidal fork with center spring
Rear suspension: Independent with Bilstein gas shock absorbers
Brake System: Grimeca calipers, linked ventilated discs, with booster
10.57 gallons
-
Very Active Member
it's funny started to pack the spyder for big trip now i have to much room LOL
-
Very Active Member
we have put over 2000 miles on bike with this mod everything is great this is perfect if you need a little more room as i did LOL
-
Active Member
Is the trunk permanently mounted on the bike? Or does it come on and off?
2013 RS-S Neutron Green/Black, Shark RSR2 helmet, Shark Evoline 3 helmet, Sena SMH20, Corbin Seat, Wheelchair Rack, TricLED fender lights, TricLed Underglow kit (green), Trunk Liner, STL Handlebars, Web Boards Driver Floorboards, backrest, BRP Saddlebags, ISCI Handbrake
-
Very Active Member
Originally Posted by kawakii
Is the trunk permanently mounted on the bike? Or does it come on and off?
it comes off when not in use
-
Very Active Member
I like the idea that there are no trailer wheel bearings to repack,no need for a spare...but,I would like it wired for lights and maybe have a temporary mount for the license plate...I can't make out if that is the plate or a tag on the box....I think you can sell these!!
-
Very Active Member
Originally Posted by cyclelover63
I like the idea that there are no trailer wheel bearings to repack,no need for a spare...but,I would like it wired for lights and maybe have a temporary mount for the license plate...I can't make out if that is the plate or a tag on the box....I think you can sell these!!
need to make some changes but it is working out great this is a prototype
-
-
Very Active Member
hunting vehicle----
i was trying to figure out how i could take a trip to the shore duck hunting. all i'd have to do is add a gun scabboard and i'd have it made! nice job!
-
No offense intednded...
Originally Posted by mastertek2000
it's funny started to pack the spyder for big trip now i have to much room LOL
I hope you did not mention anything about "too much room to your wife"...just sayin'...
-
Very Active Member
Originally Posted by srarndt
I hope you did not mention anything about "too much room to your wife"...just sayin'...
are u crazy no man would do that lol
-
Registered Users
PURCHASE ORDER
IF NOT THE FIRST, I WOULD LIKE TO BE ONE OF THE FIRST IN A GROWING LIKE CRAZY GROUP OF FOLKS WANTING TO ORDER ONE THESE TRUNKS. SERIOUSLY.
SANDY
-
Very Active Member
Great idea and good luck on the trip!
-
Very Active Member
well i put over 4000 miles on the bike with rear trunk everything went perfect total weight with trunk and cargo was 55LBS need a few days of rest then will take rear tire off inspect for abnormal wear on stuff the bike preformed great i could not ask for a better bike the rear trunk was like it was not even there the extra space was great and was able to use easy-pass on toll where with a trailer they charge you more on tolls did not notice on fuel MPG will remove rear trunk and see what i can with out it i am sure there will be some change with more weight you all ways use more fuel
-
Very Active Member
had time to take rear wheel off check out every thing it all looks great i am now 100% sure this will work going to change a few thing on my next model i make
-
Very Active Member
sorry there has been no reply been busy building a new garage http://www.spyderlovers.com/forums/s...d=1#post501241
-
Member
Any word on if you plan to make and sell this trunk rack? Will it work on a 2014 RT-S? Love the concept.
-
Ozzie Ozzie Ozzie
2013 RT Ltd Pearl White
Ryde More, Worry Less!
-
Very Active Member
Actually Peter I don't see where this would be any worse then the 40# hitch weight we run when we pull a trailer. You could just get a hitch from BRP or any of the accessory people put a plate on it and get a plastic bin like he shows in th pictures and as long as you keep to the 40# it should be ok.
Happy TRAils/NSD
Paul
2012 RT L
AMA 25 years Life Member
TRA
PGR
Rhino Riders Plate #83
Venturers #78
TOI
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|