-
SpyderLovers Founder
-
Active Member
New Ram mount location
Nice job! Very clean and unobtrusive.
Kevin
2012 RT Limited (pearl white) + bling
-
Very Active Member
Where did you get the ram mounts?
-
Lamont, do you know them Ram part number for the ball or a good description. I assume it is just threaded with a nut ?
-
Teddys favorite human
-
SpyderLovers Founder
Originally Posted by Alberts46
Lamont, do you know them Ram part number for the ball or a good description. I assume it is just threaded with a nut ?
This is the mount I used but I tapped it out for a 6mm bolt. If I was going to do it again I would run a bolt though the ball and put the nut on the dash side, it was way to hard to feed that bolt through the hole. The ball has a indent to hold the head of the bolt.
http://www.gpscity.com/ram-mount-pla...-ball-rpr.html
Originally Posted by CyncySpyder
I'll try and shoot something for you today.
-
SpyderLovers Founder
-
Very Active Member
What is that thing you have on your left handlebars next to your instrument cluster?
-
SpyderLovers Founder
Originally Posted by Arr MiHardies
What is that thing you have on your left handlebars next to your instrument cluster?
Remote for my cameras.
-
Teddys favorite human
Thank you so much for post'n the additionnal pics, I love this set-up, multi useful
That looks great, thanks for share'n with the rest of us
Last edited by CyncySpyder; 03-27-2012 at 10:30 PM.
-
MOgang Member & Pyro-Man
Lamont, I can't find the BRP handle bar Ram Mount that you mentioned in your video. The one that has the spacers and the four mounting bolts that go through into the handle bars. It doesn't show anywhere in their catalog on online.
“Dream as if you'll live forever, live as if you'll die tomorrow.”
―James Dean
-
RT-S PE#0031
Looks great Lamont. Any handlebar clearance issues in full lock turn with the cup holder?
Mark & Mary Lou Lawson
Snellville, GA USA
'10 RT-S PE #0031
'10 RT-622 Trailer
'08 Yellow SM5 #2332
'01 Black GL1800A Goldwing #0930
"Remember in the darkness what you have learned in the light." - Joe Bayly
-
SpyderLovers Founder
Originally Posted by kevorama
Lamont, I can't find the BRP handle bar Ram Mount that you mentioned in your video. The one that has the spacers and the four mounting bolts that go through into the handle bars. It doesn't show anywhere in their catalog on online.
Mine came with the mount but I know the part number and cost has been posted here before. I did a quick search but couldn't find it.
Originally Posted by MarkLawson
Looks great Lamont. Any handlebar clearance issues in full lock turn with the cup holder?
Don't do full lock often enough to notice but I'm pretty sure it wouldn't be an issue.
-
MOgang Member & Pyro-Man
I thought that I had seen it as well. The cost of $150 seems to stick in my mind. I did several searches with no luck. I'm going to call BRP and Ram monday.
Sent from my iPhone using Tapatalk
“Dream as if you'll live forever, live as if you'll die tomorrow.”
―James Dean
-
Registered Users
Originally Posted by kevorama
Lamont, I can't find the BRP handle bar Ram Mount that you mentioned in your video. The one that has the spacers and the four mounting bolts that go through into the handle bars. It doesn't show anywhere in their catalog on online.
I'm not sure if it is the same one, but on page 55 of the 2012 Can Am Roadster catalog, there is a universal GPS support that is for an RS that might work. It has a 1" RAM mount ball on it with 4 bolts that mount on the handle bar. The part number is 219400331 and it costs $154.99.
-
SpyderLovers Founder
Originally Posted by kevorama
I thought that I had seen it as well. The cost of $150 seems to stick in my mind. I did several searches with no luck. I'm going to call BRP and Ram monday.
Sent from my iPhone using Tapatalk
http://www.rammount.com/CatalogResul...5/Default.aspx
http://store.spyder.brp.com/product/...rt_and_Harness
-
MOgang Member & Pyro-Man
Thanks buddy, I'll check on it. The RS and RT handle bars might vary on bolt locations. The price sounds right. BRP always tends to the high side.
Sent from my iPhone using Tapatalk
“Dream as if you'll live forever, live as if you'll die tomorrow.”
―James Dean
-
SpyderLovers Founder
Originally Posted by kevorama
Thanks buddy, I'll check on it. The RS and RT handle bars might vary on bolt locations. The price sounds right. BRP always tends to the high side.
Sent from my iPhone using Tapatalk
The link I posted is for the RT
-
MOgang Member & Pyro-Man
Many thanks.
Sent from my iPhone using Tapatalk
“Dream as if you'll live forever, live as if you'll die tomorrow.”
―James Dean
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|