-
Very Active Member
RT Garmin Dash Install
I wanted to say thank you to Dave and Teddy, GeoffCee and a few others for pioneering the upper dash as an alternate location for the GPS on an RT. I always wear a full faced helmet and found that using the factory location, between the bars, required me to take my eyes off the road and tilt my head down to see it. With it mounted on top of the dash it is an easy glance down with your eyes to see the GPS. I did purchase the BRP GPS kit and mounted it up on top of the dash using a Ram mount ball bolted through the dash like GeoffCee did with large washers on both sides. I drilled a small hole in the lower dash for the harness to go through and found a rubber grommet at Home Depot that sealed it perfectly. The factory harness length worked fine and did not require any modification. If anyone is considering installing a GPS I would suggest sitting on your bike, with your helmet on, and checking out this location.
SpydermanCT
2010 RT-S SE5 Timeless Black PE # 794 ~ RT-622 Trailer ~ Can-Am Garmin 665 GPS ~ Elka Front Shocks ~ ESI Brightsides with Rips Kit ~ ESI RT Fender Tips Kit ~ Rear Brightsides ~ HMT Brake Light ~ Tricplate rear running / Brake LED's ~ ESI Mud Flap Lights ~ LED Day Runners ~ Right Side Inlet Covers ~ Street Magic Scuff Guards ~ IPS Key Cover ~ KewlMetal Kewlocks ~ Spyderpops Radiator Block Off Plate and Catalytic Converter Shield Set ~ Carbon Fiber Kit ~ Corbin Seat
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|