GRILLED????????

**SPYDERPOPS** · 12-01-2010, 01:28 PM

SPYDERPOPS HAS STAINLESS STEEL MESH GRILLES AVAILABLE NOW!!!!!!

SPECIAL INTRODUCTORY OFFERS UNTIL 12-20-10!!!!!!!!!!

We finally have these grilles ready to ship after a long wait. These grilles are 3D formed to fit the openings of your GS/RS Spyder, not just flat overlays. These are the real deal. These grilles give your Spyder a serious performance look.

Take a look at the pictures below and then go to WWW.SPYDERPOPS.COM to choose your set.

**Firefly** · 12-01-2010, 01:34 PM

Looking SHARP !

**Lamonster** · 12-01-2010, 01:38 PM

Looks great Bro

**nudle** · 12-01-2010, 02:05 PM

$240 all grills with fog set.
$275 all grill sets without fog set ?????

pitbull · 12-01-2010, 02:09 PM

Bike looks sharp Harvey! And the new grills even better! We need to get some of these on the shelves! are you going to have these avilable at spyder fest?

**fastfraser** · 12-01-2010, 02:10 PM

Looks good ! Nice job .

**SPYDERPOPS** · 12-01-2010, 02:35 PM

Originally Posted by the pitbull buggy

Bike looks sharp Harvey! And the new grills even better! We need to get some of these on the shelves! are you going to have these avilable at spyder fest?

Yes, we will do installs of the grilles there.

**SPYDERPOPS** · 12-01-2010, 02:38 PM

Originally Posted by nudle

$240 all grills with fog set.
$275 all grill sets without fog set ?????

If you have the fog lights there are only 2 small front grilles, if you do not have the fog lights then there are 4 grilles and 2 of them are what we refer to as deep drawn to fit in the large holes.

Big difference in tooling and material cost.
Thanks,
Harvey

**altonk** · 12-01-2010, 02:38 PM

Been waiting for someone to make these

Ordered them should look good on the carbon fiber

**Some Guy** · 12-01-2010, 02:52 PM

SWEET!

**qasamm** · 12-01-2010, 03:07 PM

Ordered a set for my ride but didn't go for the "package"- I have the BRP Givi bags and the mount goes through the rear panel grills.

**wyliec** · 12-01-2010, 03:35 PM

Is there something that needs to be cut on the radiator side?

This from your site:
NOTE:This Grille will require removal of the extra plastic that was added to cover the radiator.

**pjp623** · 12-01-2010, 03:39 PM

Looks great

**Raptor** · 12-01-2010, 04:00 PM

Looking good Sir!

Any chance of getting them in Black? If not that's cool; I can probably do something about it. But it would be better if they came in Black. wink-wink, nod-nod!!

Anyway, regardless I can foresee a set making its way onto 14 for sure.

**SPYDERPOPS** · 12-01-2010, 04:02 PM

Originally Posted by wyliec

Is there something that needs to be cut on the radiator side?

This from your site:
NOTE:This Grille will require removal of the extra plastic that was added to hide the edge of the radiator.

Yes, it's that extra peice of plastic they added to cover the radiator, an after thought by the designers. It looked completely out of place from day one and making a grille for the hole, leaving that part wouldn't have worked very well. I tried it that way for awhile and just couldn't see leaving it there.

We will have the installation instructions up on the website by this evening, hopefully.

Thanks,
Harvey

**SPYDERPOPS** · 12-01-2010, 04:09 PM

Originally Posted by Raptor

Looking good Sir!

Any chance of getting them in Black? If not that's cool; I can probably do something about it. But it would be better if they came in Black. wink-wink, nod-nod!!

Anyway, regardless I can foresee a set making its way onto 14 for sure.

Not any time soon, it would require a secondary operation and then I couldn't gaurantee how good it would stick to stainless steel.

If you want to try to paint them I would suggest glass bead blasting them to create some tooth for the paint.

Thanks,
Harvey

**Raptor** · 12-01-2010, 04:14 PM

Originally Posted by REPOPS

Not any time soon, it would require a secondary operation and then I couldn't gaurantee how good it would stick to stainless steel.

If you want to try to paint them I would suggest glass bead blasting them to create some tooth for the paint.

Thanks,
Harvey

Copy that. You know, a little splash of bling never hurt anything! It's not like chrome so it should be fine just as is now that I think about it. Thanks for your time. Again, nice work!

**SPYDERPOPS** · 12-01-2010, 04:35 PM

Originally Posted by Raptor

Copy that. You know, a little splash of bling never hurt anything! It's not like chrome so it should be fine just as is now that I think about it. Thanks for your time. Again, nice work!

The finish is not polished, it's mill finish so it's not that shiny as you suggested.
Thanks,
Harvey

**Phil** · 12-01-2010, 04:42 PM

Harvey-
Any thought for doing ones for the RT?

**boborgera** · 12-01-2010, 04:45 PM

Originally Posted by Raptor

Looking good Sir!

Any chance of getting them in Black? If not that's cool; I can probably do something about it. But it would be better if they came in Black. wink-wink, nod-nod!!

Anyway, regardless I can foresee a set making its way onto 14 for sure.

Spray them heavily with brake cleaner, let dry, And use Rustoleum spray
paint. Light coats and in low HUMIDLY.

**SPYDERPOPS** · 12-01-2010, 05:30 PM

Originally Posted by Phil

Harvey-
Any thought for doing ones for the RT?

Yes, I'm working on it!
Thanks,
Harvey

**cjackg** · 12-01-2010, 07:51 PM

Yes, I also want some for the RH side of my RT !

**StriperKing** · 12-01-2010, 11:06 PM

I would also be interested in some for the RT.

**CyncySpyder** · 12-02-2010, 08:11 AM

Originally Posted by Stripperking

I would also be interested in some for the RT.

**Lamonster** · 12-02-2010, 10:26 AM

Originally Posted by Stripperking

I would also be interested in some for the RT.

Thread: GRILLED????????

Thread Tools

Display

GRILLED????????

Ditto

Posting Permissions