Results 1 to 20 of 20
  1. #1
    Active Member
    Join Date
    Apr 2012
    Location
    Littleton, CO
    Posts
    35
    Spyder Garage
    0

    Default Replacing missing right body panel (radiator exhaust)

    Either it blew off, or someone helped themselves, but just got back from a ride and noticed the right side radiator exhaust panel is gone on my 2017 RT in Champagne Gold. This is the removable piece that covers the radiator exhaust port I guess on the right side.

    Guessing this isn't something I'll ever find pre-painted unless someone is parting out a matching Champagne Gold Spyder. Anyone know a good source to get this without buying both sides as well? Assuming I'l have to have it painted too, and I never could find this stupid paint anywhere.

    It's this piece, not my Spyder...


    missingpiece.jpg

    Thanks!

  2. #2
    Active Member Woodaddict's Avatar
    Join Date
    Mar 2017
    Location
    Salisbury,NC
    Posts
    417
    Spyder Garage
    0

    Default

    sorry to hear. NOT another one. cheapcycleparts.com might have in your color. someone has put on a Duzz fastener to never allow them to fly off again. or other ways to keep on, just make sure its pushed all way into rubber grommets
    2015 Spyder RT Ltd- bUrp - only add the "U", 2010 Honda NT700V-red,2010 Honda NT700V-silver retired @201,111 miles, 1997 Honda PC800, 1996 Honda PC800, Honda CT500, Honda Shadow 500, 1978 Suzuki GS550, 1973 Suzuki TC125, other assorted smaller bikes, Suzuki TM400



  3. #3
    Active Member
    Join Date
    Apr 2012
    Location
    Littleton, CO
    Posts
    35
    Spyder Garage
    0

    Default

    Thanks I'll have to check into that Duzz thing. I found it online at various places, it's listed as 'Ivory Metallic" in that paint code, and the one picture of the paint kit looks like the Champagne Metallic I was told this color is. So it appears if I order an "Ivory Metallic" RH panel it'll come pre-painted, but without that Can-Am cap piece. JFC, $200 for that little piece of plastic...

  4. #4
    Active Member Woodaddict's Avatar
    Join Date
    Mar 2017
    Location
    Salisbury,NC
    Posts
    417
    Spyder Garage
    0

    Default

    yes, should be able to order in color. but i don't think its painted ,i think its the color of the plastic molded
    2015 Spyder RT Ltd- bUrp - only add the "U", 2010 Honda NT700V-red,2010 Honda NT700V-silver retired @201,111 miles, 1997 Honda PC800, 1996 Honda PC800, Honda CT500, Honda Shadow 500, 1978 Suzuki GS550, 1973 Suzuki TC125, other assorted smaller bikes, Suzuki TM400



  5. #5
    Very Active Member Snowbelt Spyder's Avatar
    Join Date
    Nov 2015
    Location
    Chardon, OH
    Posts
    857
    Spyder Garage
    0

    Default

    Quote Originally Posted by jfischer View Post
    Thanks I'll have to check into that Duzz thing. I found it online at various places, it's listed as 'Ivory Metallic" in that paint code, and the one picture of the paint kit looks like the Champagne Metallic I was told this color is. So it appears if I order an "Ivory Metallic" RH panel it'll come pre-painted, but without that Can-Am cap piece. JFC, $200 for that little piece of plastic...
    Right. The chrome cap piece is another 90 bucks. And there is also a rubber pad, some hardware, and even a piece of insulation if you want to rebuild the whole panel. The parts diagram shows them all and must be ordered individually.


    Doug

    2012 Spyder RT LTD Lava Bronze, RT 622

    Original Owner

    Seal Pups, F4 Customs SWCV, Corbin, JT's Air Filter, Cat Bypass, Power Commander V, NBV, SpyderFlap, Rivco Dual Flag Holder, Lidlox, Baja Ron Sway Bar, links, plugs and wires, Adjustable Chrome Side Vents, Spyderpops Block Off Plate and Belt Guard, Bump Skid, Canisterectomy, Akrapovic, TricLed HL/FL and Mag Mirrors, Spyder Cuff with X-Grip, S-Drive, Quatrac 5, Rock Armour, P238, Smoothspyder, Laser Alignment by Gray Ghost, Windshield Arm by Noboot.

  6. #6
    Active Member
    Join Date
    Apr 2012
    Location
    Littleton, CO
    Posts
    35
    Spyder Garage
    0

    Default

    Quote Originally Posted by Snowbelt Spyder View Post
    Right. The chrome cap piece is another 90 bucks. And there is also a rubber pad, some hardware, and even a piece of insulation if you want to rebuild the whole panel. The parts diagram shows them all and must be ordered individually.
    Good God. I'll see how important those pieces are then decide if I want to add them or not I guess. Was hoping maybe there was an aftermarket logo piece, even if I had to replace both, that was cheaper...

  7. #7
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    5,308
    Spyder Garage
    0

    Default

    Try looking for Dzus or D-Zus rather than Duzz

    If you click on my username to the left & then 'View Forum Posts', you'll find more than just a couple of my posts refer to what I've done in the various threads asking about this 'fix' - and some of those posts even have pics!

    Good Luck!
    2013 RT Ltd Pearl White

  8. #8
    Active Member
    Join Date
    Apr 2012
    Location
    Littleton, CO
    Posts
    35
    Spyder Garage
    0

    Default

    Quote Originally Posted by Peter Aawen View Post
    Try looking for Dzus or D-Zus rather than Duzz

    If you click on my username to the left & then 'View Forum Posts', you'll find more than just a couple of my posts refer to what I've done in the various threads asking about this 'fix' - and some of those posts even have pics!

    Good Luck!
    Thanks Peter! I'm sure that'll be helpful when the new pieces get here. I am definitely going to do something to prevent this from happening again.

  9. #9
    Very Active Member JayBros's Avatar
    Join Date
    Jul 2014
    Location
    Mint Hill, NC
    Posts
    4,858
    Spyder Garage
    0

    Default

    From pg. 49 of your operator's guide the part you are looking for is the right hand Side Panel for which BRP does not list a PN for one in Champagne Gold. Matter of fact BRP does not list any panels in your color. If you send an email to BRPCare at brp.care@brp.com with your VIN they should be able to tell you the paint color number and you can have a white panel painted to match.
    Artillery lends dignity to what would
    otherwise be a vulgar brawl.
    ******************************
    Cognac 2014 RT-S

  10. #10
    Active Member
    Join Date
    Mar 2020
    Location
    New Mexico
    Posts
    93
    Spyder Garage
    0

    Default

    Sorry to hear you lost your panel! I had a 2010 RT in Orbit Blue and lost the left side, the one you remove to check oil on the 998 engine!$300.00 to replaced all parts needed! Like stated in previous posts, check into Dzus fasteners from Kurvy Girl! Check out some of the posts, many have pictures and directions. I followed one of the posts and installed on both of these panels! Problem solved!

  11. #11
    Very Active Member IdahoMtnSpyder's Avatar
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    8,145
    Spyder Garage
    1

    Default

    Quote Originally Posted by jfischer View Post
    Either it blew off, or someone helped themselves, but just got back from a ride and noticed the right side radiator exhaust panel is gone on my 2017 RT in Champagne Gold. This is the removable piece that covers the radiator exhaust port I guess on the right side.

    Guessing this isn't something I'll ever find pre-painted unless someone is parting out a matching Champagne Gold Spyder. Anyone know a good source to get this without buying both sides as well? Assuming I'l have to have it painted too, and I never could find this stupid paint anywhere.

    It's this piece, not my Spyder...


    missingpiece.jpg

    Thanks!
    I think this may be what you are looking for - BRP part # 705010017. The BRP parts catalog lists it as Ivory, not Champagne, but there are no Ivory paint colors for 2017 RT.

    2014 Copper RTS

    Tri-Axis bars, CB, BajaRon sway bar & shock adjusters, SpyderPop's Bumpskid, NBV peg brackets, LED headlights and modulator, Wolo trumpet air horns, trailer hitch, custom trailer harness, high mount turn signals, Custom Dynamics brake light, LED turn signal lights on mirrors, LED strip light for a dash light, garage door opener, LED lights in frunk, trunk, and saddlebags, RAM mounts and cradles for tablet (for GPS) and phone (for music), and Smooth Spyder belt tensioner.
    2014 RTS , Copper! (officially Cognac)

  12. #12
    Active Member
    Join Date
    May 2020
    Location
    Bunnell Florida
    Posts
    36
    Spyder Garage
    0

    Default

    just finished replacing mine last week....but i did make a tether wire..it will never happen again..

  13. #13
    Active Member Snoking1127's Avatar
    Join Date
    Oct 2020
    Location
    Arizona
    Posts
    475
    Spyder Garage
    0

    Default

    Quote Originally Posted by jfischer View Post
    Either it blew off, or someone helped themselves, but just got back from a ride and noticed the right side radiator exhaust panel is gone on my 2017 RT in Champagne Gold. This is the removable piece that covers the radiator exhaust port I guess on the right side.

    Guessing this isn't something I'll ever find pre-painted unless someone is parting out a matching Champagne Gold Spyder. Anyone know a good source to get this without buying both sides as well? Assuming I'l have to have it painted too, and I never could find this stupid paint anywhere.

    It's this piece, not my Spyder...


    missingpiece.jpg

    Thanks!
    Is it a limited chrome model?

    #5630 Chrome Side Panel Cap Kit Package LTD
    219400195 Appears to be both left and right pieces.


    #5590 Ivory RH Side Panel Ivory Model
    705010017 I would check with BRP on the color.


    If I understand this correctly, 2017 and 2018 were the only two years for the champagne color and that is the only two years that the Ivory shows up in the parts listing?

    According to this, There were four colors in 2017: https://www.slingmods.com/can-am-spy...on-model-chart

    https://www.brppartshouse.com/oempar...ody-all-models

    5590Ivory LH Side Panel Ivory Model
    705010016
    $195.99
    1
    5590Ivory RH Side Panel Ivory Model
    705010017
    $195.99
    1
    5590Orbital Blue LH Side Panel Blue Model
    705009017
    $195.99
    1
    5590Orbital Blue RH Side Panel Blue Model
    705009018
    $195.99
    1
    5590Vegas White Pearl LH Side Panel White Mod
    705008999
    $189.99
    1
    5590Vegas White Pearl RH Side Panel White Mod
    705009000
    $189.99
    1
    5590Asphalt Gray LH Side Panel Asphalt Gray [+]
    705011189
    $195.99
    1
    5590Asphalt Gray RH Side Panel Asphalt Gray [+]
    705011190
    $195.99
    1
    2018 RT Limited Chrome - Champagne Metallic - East Valley of Phoenix

    Magic Mirrors, 360 LED head lights, dual USB with volt meter, GPS, phone and drink holders, Front tires = Formoza's, General out back, BajaRon sway bar & Adjuster, dash cam, foam grips, 2 sizes of windshields, Ikea sheep skin, HW pegs, third brake light 4 LED strobe for 7 seconds and then on steady, rear LED turn signals/8 ohm 50W resistors and driver back rest.

  14. #14
    Active Member
    Join Date
    Apr 2012
    Location
    Littleton, CO
    Posts
    35
    Spyder Garage
    0

    Default

    Quote Originally Posted by Snoking1127 View Post
    Is it a limited chrome model?

    #5630 Chrome Side Panel Cap Kit Package LTD
    219400195 Appears to be both left and right pieces.


    #5590 Ivory RH Side Panel Ivory Model
    705010017 I would check with BRP on the color.


    If I understand this correctly, 2017 and 2018 were the only two years for the champagne color and that is the only two years that the Ivory shows up in the parts listing?
    No, it's not a limited so that Can-Am piece is more of a pewter color I'd say vs chrome. I am pretty sure that Ivory color is also the Champagne Gold color from what I've found. At least that's what I ordered

    Once I get that I'll see about the Can-Am cover piece and how to secure these things to the bike so I don't have to do this again.

    Thanks!

  15. #15
    Active Member
    Join Date
    Apr 2012
    Location
    Littleton, CO
    Posts
    35
    Spyder Garage
    0

    Default

    So I think I want to do the Dzus fasteners to help hold these $300 panels on. For those who have done this already, what size did you use? Don't want to get the wrong length as they aren't exactly cheap.

    Thanks!

  16. #16
    Ozzie Ozzie Ozzie Peter Aawen's Avatar
    Join Date
    Dec 2013
    Location
    Australia; Sth Aust, Adelaide Hills
    Posts
    5,308
    Spyder Garage
    0

    Default

    Check in my earlier posts via a search as mentioned in post # 7 above, but I'm pretty sure they are 18mm long

    Here in Oz they certainly aren't expensive, you can get them in a pack of 4 for less than $10!!
    2013 RT Ltd Pearl White

  17. #17
    Very Active Member ThreeWheels's Avatar
    Join Date
    Feb 2010
    Location
    Danbury Connecticut
    Posts
    3,147
    Spyder Garage
    0

    Default

    Quote Originally Posted by jfischer View Post
    So I think I want to do the Dzus fasteners to help hold these $300 panels on. For those who have done this already, what size did you use? Don't want to get the wrong length as they aren't exactly cheap.

    Thanks!
    The Dzus fasteners are one way to go. Of course they change the look of the Spyder a little bit. That could be good as you could wear the Dzus as a proud farkle.
    You might also consider adding velcro on the inside face of the panel with matching velcro mounted on the frame of the bike.
    I found that quite adequate after losing TWO panels on separate occassions.
    If it ain't broke, don't break it.
    IBA #47122

  18. #18
    Very Active Member PMK's Avatar
    Join Date
    Jan 2014
    Location
    SoFlo
    Posts
    3,351
    Spyder Garage
    1

    Default

    Quote Originally Posted by jfischer View Post
    So I think I want to do the Dzus fasteners to help hold these $300 panels on. For those who have done this already, what size did you use? Don't want to get the wrong length as they aren't exactly cheap.

    Thanks!
    With easy access to better 1/4 turn fasteners, I used a cleaner looking setup on ours.

    If you want inexpensive and easy, go with a plastic push pin.
    2014 RTS , Nippon Denso plugs no Pearl White

  19. #19
    Active Member
    Join Date
    Apr 2012
    Location
    Littleton, CO
    Posts
    35
    Spyder Garage
    0

    Default

    Quote Originally Posted by PMK View Post
    With easy access to better 1/4 turn fasteners, I used a cleaner looking setup on ours.

    If you want inexpensive and easy, go with a plastic push pin.
    Thanks, I'll look at 1/4 turn fasteners as well, was mostly unsure of the right length for them. The Velcro idea sounds good too

  20. #20
    Member
    Join Date
    Jan 2019
    Location
    Western PA
    Posts
    18
    Spyder Garage
    1

    Default

    Here’s an option I posted about a while back.

    https://www.spyderlovers.com/forums/...ng-side-panels

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •