-
Active Member
Replace original handlebars with Attitude bars. 2016 F3 Special
I would like to replace the handlebars on my new 2016 F3 Special Limited. It looks like it is pretty basic but with the heated grips and other accessories I a not sure of the complexity. Is there a video or document that shows how to do this. I am somewhat mechanical. Or is this something you recommend I go to dealer and have them do?
Thanks
Badco
2016 Spyder F3 Limited Special Series
-
Very Active Member
Originally Posted by Badco149
I would like to replace the handlebars on my new 2016 F3 Special Limited. It looks like it is pretty basic but with the heated grips and other accessories I a not sure of the complexity. Is there a video or document that shows how to do this. I am somewhat mechanical. Or is this something you recommend I go to dealer and have them do?
Thanks
Badco
It's a very easy job. The dealer allows less than 30 minutes to change them.
2020 Chalk, RT Limited, Dark and matching RT622 trailer and BRP hitch. BRP Drivers Backrest, Auxiliary Light, Garmin Zumo XT, GPS Support, RT Rear Panel and Travel Cover. Spyderpops LEDs on fenders, mirrors, saddlebags, top case and RT rear panel. Spyderpops Rock Guard. BajaRon Swaybar, Wolo Bad Boy horn, Freedom Windshield, Elka Shocks.
-
Very Active Member
You actually won't even be messing with the grips/controls. They separate from the bars as complete units when you remove the upper and lower caps. Just put a blanket over the bodywork to protect the paint cuz you need to lay them out of the way while you R&R the bars. There are guide pins on both the bars and the control/grip assemblies to orient everything. You will get all new hardware, with pre-applied locktite etc if it is an actual BRP accessory....
I have not used the attitude bars per se but I did do this job switching to the drag bars.
2015 F3-S , Pure Magnesium Metallic/Steel Black Metallic
-
windshield
what windshield is that on your limited i want a different on for my limited special
-
Here is a link to the instructions for installing the handlebars.
http://instructions.brp.com/content/...0548,219400550
2015 RS SM5, Navy F4 Fighter wrap
Passenger Backrest, RT Handlebars,
BRP Comfort Seat, Airhawk R cushion,
Garmin 660LM GPS, LidLox, Can-AM Top case
-
Active Member
Originally Posted by fatboy
what windshield is that on your limited i want a different on for my limited special
Hi The windshield is the BRP Tall Boy. I just installed it a couple weeks ago. I like it much better then the low boy that came stock.
Here is the link.
http://store.spyder.brp.com/product/...Boy_Windshield
Badco
2016 Spyder F3 Limited Special Series
-
Active Member
Originally Posted by hypurone
You actually won't even be messing with the grips/controls. They separate from the bars as complete units when you remove the upper and lower caps. Just put a blanket over the bodywork to protect the paint cuz you need to lay them out of the way while you R&R the bars. There are guide pins on both the bars and the control/grip assemblies to orient everything. You will get all new hardware, with pre-applied locktite etc if it is an actual BRP accessory....
I have not used the attitude bars per se but I did do this job switching to the drag bars.
Thank you very reassuring. I have replaced the windshield and added the back seat rest and that went well. So I will give this a try.
Badco
2016 Spyder F3 Limited Special Series
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|