-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Wiring to Front Fuse Box
- Thread starter dicko
- Start date
NancysToy
Motorbike Professor
I couldn't figure it out quickly, today. You may have another challenge, though. As I understand it, both fuses are wired to the 12 V power outlet wiring, so they can't be used together. If that's the case, you would have to modify the fuse box and/or wiring harness. I just added an auxiliary fuse box instead.
Scotty
dicko
New member
A continuity tester shows that there is power to both fuse sockets when the ignition key is on (individually at least). I was going to run a line with a 10A in-line fuse straight off the battery but I'd really like one switched and one unswitched outlet.
dicko
New member
What I really meant to ask, is how to lever the front fuse box out, specially without breaking anything.
Just got sidetracked. As I was looking at the fusebox, a box arrived with my Hindle in it. It's now installed and ready to go. Found just the tool to fit the spring. About 25 years ago I inherited a box of tools from my grandfather. A few weeks ago, I opened the box and amongst the stuff was a long thin flat-bladed screwdriver with a notch cut in the blade. Just the tool to push the spring back over the loop from the left side of the bike.
Just got sidetracked. As I was looking at the fusebox, a box arrived with my Hindle in it. It's now installed and ready to go. Found just the tool to fit the spring. About 25 years ago I inherited a box of tools from my grandfather. A few weeks ago, I opened the box and amongst the stuff was a long thin flat-bladed screwdriver with a notch cut in the blade. Just the tool to push the spring back over the loop from the left side of the bike.
