wiring help

[eagle]

need to hook up 4 pin harness to an 08 gs , what do i need to do this?

 

[MarkLawson]

need to hook up 4 pin harness to an 08 gs , what do i need to do this?

I'm sure I can't help you, but I'm also sure those who can will, if you give them a little more information about what it is you're trying to do.

Is this for towing a trailer or what? While you know what you're trying to do, it may be difficult for others to tell from your post.

 

[NancysToy]

You need a 5-to-4 (3-to-2) converter. Tap into the wiring and you should be set. Hopkins makes a good converter, that has worked for other RS owners.

 

[Littlebadwolf]

This is the hitch I've got on my RS...The same guy tht sells it also sells a harness for $39 that wires up direct with the standard gs wiring...You've got to ask him for it in email because it's not listed on EBAY. Piece of cake to put on...

http://www.ebay.com/itm/Can-Am-Spyder-RS-Trailer-Tow-Hitch-/330518357006

 

[BLUEKNIGHT911]

5 to 4 wiring plug

This worked for me, I believe most auto stores would sell them.....Peterson #5410.....cost $16, it came with lots of wire and posi-taps....quite a bargain....Took about 35 minutes to hook up to my 08 GS....Mike :thumbup:

 

[BLUEKNIGHT911]

convertor

You need a 5-to-4 (3-to-2) converter. Tap into the wiring and you should be set. Hopkins makes a good converter, that has worked for other RS owners.

Scotty, the 5 to 4 part I understand.....but the ( 3 to 2 ).......what are you doing with this ????...Mike

 

[NancysToy]

Scotty, the 5 to 4 part I understand.....but the ( 3 to 2 ).......what are you doing with this ????...Mike

Some are labeled as "3-to-2". Don't ask me why, I'm just the messenger.