Which way do the beveled washers on rear axle go?

[pam135]

which way do the beveled washers go on rear axle bolt

 

[pam135]

beveled washers

Which way do the beveled washers on rear axle go?

 

[UtahPete]

which way do the beveled washers go on rear axle bolt

I'm not sure what you're asking.

 

[pidjones]

Bevel washers always go with opening to the clamped side (away from nut/bolt head) unless stacked. If stacked it depends on whether stacked for higher spring rate or more available compression distance.

 

[pam135]

does the beveled side go toward the wheel or away

 

[DGoebel]

If you're referring to the washers like this, The cup faces the wheel centerline, so the nut compresses the washer flat, but if you're using two on a side then the cubs face each other,

 

[UtahPete]

Beveled can mean concave or convex

Terms like 'bevel' or 'cup' are rather ambiguous.

 

[IdahoMtnSpyder]

When did BRP start using beveled washers on the rear axle?

 

[UtahPete]

Pam, we have no clue which bike you're referring to.

 

[ulflyer]

Maybe this diagram on this parts page will help:

https://www.cheapcycleparts.com/oemparts/a/cam/567452fa87a8660fdc44d8a2/drive-system-rear

 

[Mikey]

I do not recall of any bevel washers on the axle but if you have them put them cupped to the wheel so when you tighten them they flatten out!