-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Which of these 2 windshield heights for my 2020 Spyder F3?
- Thread starter k1hog
- Start date
Peteoz
Well-known member
That’s great to hear, Fatboy, but how tall are you, how long is your inseam, how much wind do you get, what model F3 do you ride ?
Pete
juscuz
Member
Before I actually knew what I wanted/needed, went the Blue Ridge route on my F3s, WRONG. Then I tried the 28" F4 Customs, workable but changed to the 32" F4 Customs. like looking thru my windshield at 6'1 especially after a nice gouge in my helmet from a rock hit when I had the blue ridge. Each to his own I guess.
juscuz
Member
Before I actually knew what I wanted/needed, went the Blue Ridge route on my F3s, WRONG. Then I tried the 28" F4 Customs, workable but changed to the 32" F4 Customs. like looking thru my windshield at 6'1 especially after a nice gouge in my helmet from a rock hit when I had the blue ridge. Each to his own I guess.
Last edited:
justsmile0808
New member
Johnnie - go to Lamont's website - http://www.lamonstergarage.com/ . He has several heights of Freedom Shield's F3 windscreens in stock, with several different tint options - and far less costly than OEM (leaving you with much needed cash to do other mods). I've had two Freedom screens and absolutely love them!! http://www.lamonstergarage.com/can-am-spyder-f3-t-ltd-freedom-windshield-lamonster/
I went with the 15" light grey tint (I am 5'2"). I am thinking at your height, you would need the 19". However, there are clear directions there to help you decide which height is right for you.
RICZ
New member
To determine the increased windshield height needed, I tape or clamp (rubber tipped of course) a piece of cardboard to the top of the existing w/s and go riding. During the ride, I raise or lower the cardboard until I have the height I want the new w/s to be and note that measurement.
For my last w/s, I didn't do that as we were in a long rainy period (still are) so I did that in the garage sitting on the bike. That was the wrong thing to do because when the new w/s arrived, it was too short by a couple inches. Fortunately, the flip saved the day and now I have a w/s I can well see over and with the wind protection of a much taller one.
There's a saying for that; Some things happen for a reason.
For my last w/s, I didn't do that as we were in a long rainy period (still are) so I did that in the garage sitting on the bike. That was the wrong thing to do because when the new w/s arrived, it was too short by a couple inches. Fortunately, the flip saved the day and now I have a w/s I can well see over and with the wind protection of a much taller one.
There's a saying for that; Some things happen for a reason.
troop
Well-known member
F3's are difficult to determine height, as the windshield mfr's use different mounts, making windshield lengths harder to determine. Most mfr's will give a recommended shield based on rider's height. That's why I like my Madstad's. They are adjustable up/down/fore/aft by a few inches. Super easy to adjust the angle with two knobs. Lower/angle back on hot days and raise/angle up in the rain. Win/win.
Peteoz
Well-known member
Yeah, that’s why I have mounted my F4 screen (it has a shape that suits me), on my Madstad screen brackets, troop. Having that adjustability where you can lower the screen and lay it back, but sit it up on long/raining trips is a huge plus indeed.
Pete
Peteoz
Well-known member
stillnjeve
New member
Hi, I am just on 180cm (5'11") and I have the Blue Ridge on my recently purchased 2017 F3S. I would gladly give it to you and $100 AUS for your first therapy session. It has the innate ability to vibrate one's head so much that you can't see correctly or hear your usually crystal clear Bluetooth music. It is the worst designed piece of crap and I cannot replace it quick enough. I tried putting on some of those lovely attachments to increase the height but I could not find one big enough. I will be replacing mine with something taller for touring riding during the beautiful Aussie winter 
and will get a small one to face the breeze and cool down during the scorching Aussie summer. Stay away from the blue ridge as everyone I speak to who has had one (note had, not has) hated it with a passion.
If you have a mate who is too poor to replace his/hers/theirs, see if they will let you have a test ride. I did that with a mate's bigger screen and I love it. I will likely get the same screen.
Good luck with your screen upgrade.
Previously owned a 2015 RTS for 4 yrs with an upgraded F4 28" screen to block the breeze from Big Aussie trucks on our crap single-lane highways
and will get a small one to face the breeze and cool down during the scorching Aussie summer. Stay away from the blue ridge as everyone I speak to who has had one (note had, not has) hated it with a passion.If you have a mate who is too poor to replace his/hers/theirs, see if they will let you have a test ride. I did that with a mate's bigger screen and I love it. I will likely get the same screen.
Good luck with your screen upgrade.
Previously owned a 2015 RTS for 4 yrs with an upgraded F4 28" screen to block the breeze from Big Aussie trucks on our crap single-lane highways
Last edited by a moderator:
Peteoz
Well-known member
Stillnjeve, I nearly had a great offer for you until I realised you were riding an “s”. I had a Madstad on my 16 F3-L because the original Blueridge did the same to me as it did to you. I would have given it to you (I now ride a ‘21 RT), but it wouldn’t fit your “s”. I would definitely suggest you look at the Madstad. It come with adjustable hardware that lets you move the screen vertically about 4” and angle horizontally about 4” at the top. Other screens like F4, Jurock, Freedom etc are very good, but the Madstad adjustability makes it a game breaker.
Pete
Pete
Hi, I am just on 180cm (5'11") and I have the Blue Ridge on my recently purchased 2017 F3S. I would gladly give it to you and $100 AUS for your first therapy session. It has the innate ability to vibrate ones head so much that you can see correctly or hear your usually crystal clear Bluetooth music. It is the worst designed piece of crap and I cannot replace it quick enough. I tried putting on some of those lovely attachments to increase the height but I could not find one big enough. I will be replacing mine with something taller for touring riding during the beautiful Aussie winter
If you have a mate who is too poor to replace his/hers/theirs, see if they will let you have a test ride. I did that with a mate's bigger screen and I love it. I will likely get the same screen.
Good luck with your screen upgrade.
Previously owned a 2015 RTS for 4 yrs with an upgraded F4 28" screen to block the breeze from Big Aussie trucks on our crap single-lane highways
I have a 21 F3 base model. I am 6'2" and initially went with the Route 129. I didn't go with the Blue Ridge on the advice here on this forum that it caused a lot of buffeting. The Route 129 wind hit me directly in the chest and I wanted it to hit a bit higher. I utilized the Route 129 hardware and purchased a 23" Jurock windshield. Now, I still get some air, but it hits me better since I like some wind.
I see you purchased the Blue Ridge, and I hope it works for you. If not, at least now you have options.
Last edited by a moderator:
Similar threads
