• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Where should I tap into to get switched power for the FZ-1 Fuzeblock?

george123

Member
I installed the fuze block on the right side behind the panel, just below the right mirror. I ran the constant power and ground lines straight to the battery. Works great. Where should I run the switched line to? I don't want to upset the can bus system.
 
Used used this

Hi when I did mine I tapped into the switched wire for the gas gauge as the gauge was no longer there. It works great!
 
I still have my gages there, but people say the digital display is more accurate, so I might disconnect them. Until I do, would it mess anything up to tie into the switched positive on either the temp or fuel gage?
 
Back
Top