• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

wheel adapters for the spyder

I think so, just have to clean the leathers more often

I may find a custom bike shop to make a pair fenders if i get tired of the dirty showers
 
new tires coming

I ordered these tires for all three wheels

Hankook Ventus r-s3 in 225/45 r15

http://www.hankooktireusa.com

In general the handling with the 225/55s all the way around is good pushed some weight to the rear helps with the oversteer
with the wider stance and scrub radius the turn in is better
it handles a little more nervous but thats the price you pay
the 45 profiles will drop the ride height and roll center so the cornering should be better
the nanny is not complaining, well it always complains when i ride but only when i do stuff i shouldn't like accelerate into the apex
it's a little early for extreme performance summer tires but there is enough rubber under such a light vehicle now to more than make up for the lack of heat.

with the extra g force in the corners you have to be more careful about acceleration into a corner but you shouldn't be doing that anyway

i just have to back off at the turn in.

you can open it after the apex when turning out and the nanny seems fine with that
 
I have over 4000 flawless miles on my 215/35 ZR 17's, only about a half inch taller than stock but 2 inches wider. Handling is greatly improved, i actually reduced the preload on my front springs. Fenders are steel and show alot of vibration, they are to heavy for the fender stuts. I'd like to get my hands on a couple pair of original fenders to fab a set out of plastic.

DCP_1221.jpg

DCP_1222.jpg

IMG_1398.jpg

IMG_1391.jpg

IMG_1389.jpg
 
Back
Top