What's it for?

[philblumenfeld]

Hey all,

Can any one tell me what this post/valve/nipple is for on the right side and in front of the muffler on my 2012 rt ltd se5?
I ran over a curb the other day and broke this off completely, leaving a quarter size hole.
Patched up the hole and all is good there as far as noise is concerned.
This is the link to BRP parts showing the part in question. It is number 16/17.
http://parts.spyder.brp.com/cgi-bin/ImgServ.exe/convert?ilFN=E:\\EmpartWeb\\data\\1s\\06\Y1202\21Y1202.tif&ilSC=25&ilIV=0&ilBR=0&ilIF=P&ilRE=8

Thanks in advance, you folks are the greatest.

 

[2Paw]

Your link

only takes us to the index. No details.

 

[paulbrinker]

It appears to be a test port that is capped off. I do not think it is anything to worry about, as long as your repair is sufficient.

 

[philblumenfeld]

only takes us to the index. No details.

Sorry about that.

Try this:
http://parts.spyder.brp.com/cgi-bin...Y1202.tif&ilSC=25&ilIV=0&ilBR=0&ilIF=P&ilRE=8

 

[cuznjohn]

could be for a 02 sensor

 

[Chupaca]

Test port...

as long as you plugged the hole your fine. Used to balance cylinders as far as mixtures go. Have not seen them used very often. At some point you could have them weld on another...:thumbup: