Wmoater
Active member
I forget which fuse powers the usb in the 14-19 RT in the frunk. I don’t want to just start pulling each for the fun of it. I remember having to remove the entire front, cut the zipties behind the frunk and simply clip the two wires that were zip tied to the frame to the usb socket. I think I had to remove one fuse and put in another slot I think. It was 1 number apart I think. It was 4 years ago. Which fuse number is it, anyone remember? I did a search and for some reason I can’t find any. I remember there being many posts about it when I did it. What fuse size is it also? 5 or 10? The reason I’m asking is I’d like to cut the positive to the usb, split it and power a set of 2 amp rivco spots so they come on when the machine key turns. Usb should be no more than 2 amps and the rivco spots are 2 amps. 4 amps is nothing unless something else is with the frunk usb. I’d like to pull the fuse and see what else if anything goes out. No need for an additional switch on the dash or direct run to the battery to power these spots in my opinion. Their online instructions show direct battery power to a new button switch on the dash. I want them on at all times I think. My other option is to tap into the fog lights. Since those are going to be leds the amps have to be cut in half I’d assume. Therefore the built in switch for the fogs souls also run the spots.
