I met wife for dinner Friday night, when I started up my '13 RT Limited the check engine light came on. Trike was running and drove it home with no issue expect for the light. About a 1hr later went to check the code and there is no code or check engine light. Went out for a ride tonight and noticed the clock is off by 2hr, but no engine light or issues. I plan on taking a ride this coming week for work driving from Dallas to Tulsa should I be worried?
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Weird, has this happened to anyone? Check engine light come on then disappear
- Thread starter T2ride
- Start date
IGETAROUND
Active member
Check that your battery connections are tight
2 Cruysyn
New member
What was the temperature like Friday evening? It's been pretty hot up here!
Had a similar thing happen to me a couple years back. Was a particularly hot day. Spyder was sitting in the lot of a local restaurant while my wife and I were in eating. Went to leave, started the Spyder and got the check engine light. Pulled the code (immediately) and found P0127. No surprise really that the intake air temperature had exceeded the ability of the sensor to read since the Spyder had time to sit and soak up the heat not only from the headers all confined within the tupperware but also heat that had accumulated in the black asphalt the Spyder was sitting on. The ambient temperature was no help either.
Rode it home, turned the Spyder off and let 'er cool down. Never saw the code again. I imagine the code would have been stored even though not viewable via the three finger salute. You might ask your service department to look next time B.U.D.S. is connected.
Of course this doesn't account for your clock being off two hours. It's always good to make sure the cables on your battery are tight. They will work themselves loose. Been there, done that. Star lock washers resolved that problem for me.
Had a similar thing happen to me a couple years back. Was a particularly hot day. Spyder was sitting in the lot of a local restaurant while my wife and I were in eating. Went to leave, started the Spyder and got the check engine light. Pulled the code (immediately) and found P0127. No surprise really that the intake air temperature had exceeded the ability of the sensor to read since the Spyder had time to sit and soak up the heat not only from the headers all confined within the tupperware but also heat that had accumulated in the black asphalt the Spyder was sitting on. The ambient temperature was no help either.
Rode it home, turned the Spyder off and let 'er cool down. Never saw the code again. I imagine the code would have been stored even though not viewable via the three finger salute. You might ask your service department to look next time B.U.D.S. is connected.
Of course this doesn't account for your clock being off two hours. It's always good to make sure the cables on your battery are tight. They will work themselves loose. Been there, done that. Star lock washers resolved that problem for me.
Last edited:
billybovine
Active member
When the check engine light comes on and is not flashing, there is a non critical engine management system fault. As others have said may be heat related in your case. Active faults can only be retreived by you when the faults are active. So of course the active faults will not show when they are gone. Now the dealer can see the faults that have occurred when connected to the diagnostic computer. So not weird at all.
Drive on and don't worry about it. Mention it the next time it goes in for service.
Drive on and don't worry about it. Mention it the next time it goes in for service.
Deseret Rider
New member
Check Engine light
OK---take this with a grain of salt because I don't now own a Can AM----but I am aware that on some of the Polaris machines that are equipped with a 'throttle position sensor" the check engine light will come on when that is malfunctioning. Most often the 'fix' for that is to turn off the key----put the gear in neutral---then turn on the key (but do not start the engine) and simply push the accelerator pedal to the floor and back a few time until the light goes out. Evidently this procedure resets the computer somehow. When the check engine light goes out----start it up and drive away. I don't know that this will work with your machine-- can't hurt?
OK---take this with a grain of salt because I don't now own a Can AM----but I am aware that on some of the Polaris machines that are equipped with a 'throttle position sensor" the check engine light will come on when that is malfunctioning. Most often the 'fix' for that is to turn off the key----put the gear in neutral---then turn on the key (but do not start the engine) and simply push the accelerator pedal to the floor and back a few time until the light goes out. Evidently this procedure resets the computer somehow. When the check engine light goes out----start it up and drive away. I don't know that this will work with your machine-- can't hurt?
ARtraveler
R.I.P. Dwayne
Heating issues from the sun can screw up the electronics as well as loose battery connections. IMO: it is sounding like either/or in this scenario. :thumbup:
mac spyder
New member
Check Engine Light
We had the same thing two weeks ago while in the smokies. After a morning of driving through elevations at slow speeds and it being hot, the check engine light came on after we had eaten lunch and was ready for another treck into the mountains. With some assistance over the phone from the owner of PitBull Power Sports and his tech team, I was able to pull up the code which was P0175, "system too rich". After the tech explaining what it was and that it wouldn't hurt to drive it, I felt a liitle more comfortable about continuing. Twice after that the light came and went but never showed the code again. The morning we left Gatlinburg TN, to head back to Illinois, the light was off and never came back on. Needless to say I am having it checked this weekend.A big thank you to Len and his crew at PitBull for helping us through it.
We had the same thing two weeks ago while in the smokies. After a morning of driving through elevations at slow speeds and it being hot, the check engine light came on after we had eaten lunch and was ready for another treck into the mountains. With some assistance over the phone from the owner of PitBull Power Sports and his tech team, I was able to pull up the code which was P0175, "system too rich". After the tech explaining what it was and that it wouldn't hurt to drive it, I felt a liitle more comfortable about continuing. Twice after that the light came and went but never showed the code again. The morning we left Gatlinburg TN, to head back to Illinois, the light was off and never came back on. Needless to say I am having it checked this weekend.A big thank you to Len and his crew at PitBull for helping us through it.
2RTsGV
New member
I had the check engine light come on this year at spyderfest and took the bike (2013 RT) to Pitbull. the BRP tech worked on it and told me it was the purge valve. He fixed it and explained that to help keep the purge valve clear it in future, to ride in the 5500 to 6000 rpm range for a few miles every now and then.
cybrj
New member
Check engine
I picked up my :spyder2: in Grand Rapids, Mi. heading to Adrian, Mi. having gone 30 yrs. without riding a motorcycle... went 2 miles before the check engine light came on... <ready to fill britches> pulled over looked at manual and it said "turn off engine, pull key, reinsert key and restart" which was great advice... I have not seen the check engine light since.
I picked up my :spyder2: in Grand Rapids, Mi. heading to Adrian, Mi. having gone 30 yrs. without riding a motorcycle... went 2 miles before the check engine light came on... <ready to fill britches> pulled over looked at manual and it said "turn off engine, pull key, reinsert key and restart" which was great advice... I have not seen the check engine light since.
IdahoMtnSpyder
Active member
How hot was the weather? If the sun is out and hot, the temp is north of 100, and the Spyder is sitting in the sun, the temp sensor can easily go above 120°F. You'll get a check engine light at a sensor temp over 120. Ride the bike long enough to get the sensor cooled down, stop, turn it off, restart, and the check engine will go away.
Similar threads
