• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

voltmeter gauge

wyliec

New member



Can anyone using a kuryakyn led voltage gauge tell me how many green led's are lit when operating above 4,000 rpm's on your spyder? Mine is showing two and wondering if it should be higher.
 



Can anyone using a kuryakyn led voltage gauge tell me how many green led's are lit when operating above 4,000 rpm's on your spyder? Mine is showing two and wondering if it should be higher.

Mine reads one green at idle 1400rpm, 2 greens during normal ops. never seen more than 2 greens

using an analog multimter, it ranges from 12.5 volts at idle to 13.5 at hyway speeds.
 
The reading is dependent upon where you are taking it.
You should be seeing around 14V across the battery at 4000 RPM & greater.

If you are reading the voltage elsewhere then it's anybody's guess between 12.6 and 13.5 VDC

Agree. I get 13.9 to 14.0 when riding, taken across the battery. With a heated vest plugged in and both front and rear grips on high, it drops to about 13.8 V. The BRP spec is 13.0 - 14.0 V at 4,000 rpm, high-beams on, heated grips on high, no other accessories turned on.
 
Back
Top