• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Vibrating Fender

:agree: But if it's a front fender; check the mounting bolts, before getting yourself crazy over it... :thumbup:

If it's the rear fender, and you ride an RS; start looking for cracked struts... :shocked:

And DON"T ride it any further than necessary to fix it! :yikes:
 
I ride a 2014 Limited the only thing that can be seen is the right front fender vibrating as you are riding.



Jwic3 ......................... 2014 Limited what????


while stopped can you make it move by hand? and if so look for a loose bolt somewhere.

(if you put your year and model Spyder in your signature, then everyone will know what you have for any further questions)

Cruzr Joe
 
:agree:
Right front fender? You should be able to find the mounting bolts for the fender... A little bit of investigating will be necessary...
I'd suggest raising the front of the bike, and pulling the wheel; it'll give you more fighting room! :thumbup:
 
Went outside in this cold rainy azz Colorado weather and found the right fender moves when pushed or pulled and the left fender is stiff.
RT 2014 Limited



attachment.php
 

Attachments

  • 10254020_792358244110154_588573435839533351_n.jpg
    10254020_792358244110154_588573435839533351_n.jpg
    57 KB · Views: 137
Last edited:
That inner fender shroud can be removed easily; there's about two bolts at each end of it: fore and aft...
Pop that off, and you should have access to the rest of the mounting bracketry for the fender. :thumbup:
 
Agree..!!

with all above but also check the struts for welding cracks. Right above the bolts there will be some welding. We have seen some fail...:thumbup:
 
Back
Top