-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Unlocking Seat
- Thread starter bigdog4ou
- Start date
Chupaca
New member
Yeah..!!
check a thread just posted by Blueknight 911 or click here...http://www.spyderlovers.com/forums/...UL-IDEA-3-A-CUR-E-FOR-SOMETHING-ANNOYING..you can also remove the latch...:thumbup:
Just occured to me that if you fill in the knotch on the pin (tape over or insert a spring clip) this would prevent the latch from ctching...
check a thread just posted by Blueknight 911 or click here...http://www.spyderlovers.com/forums/...UL-IDEA-3-A-CUR-E-FOR-SOMETHING-ANNOYING..you can also remove the latch...:thumbup:
Just occured to me that if you fill in the knotch on the pin (tape over or insert a spring clip) this would prevent the latch from ctching...
Last edited:
StanProff
New member
Raise the seat and look at the latching post. take a cresent or small wrench and loosen the jut on the post and it will fall into your hand. takes about 1 minute. Mine has been that way for a year or so. the seat is not going to go anywhere without the latch, you and gravity hold it down anyway. Don't have to fool with the key to put gas in.
ARtraveler
R.I.P. Dwayne
As posted, just remove the pin and your worries should be over. Some also remove the shock, if the seat is not heavy enough to hold things down when you are not seated.
Similar threads
