My Toy Hauler is not very close to the ground which puts the rear ramp/door at quite a Steep Angle. AND because of the lay out of the TH I Have To Back the Spyder into it. When it's on solid ground and I put it into reverse it backs up fine, BUT backing up the rear ramp/door it pulses terribly! More than one Spyder Owner has said that the reason for the pulsing is to keep the Spyder from building up too much speed and making a sudden turn right or left and being thrown off the Spyder!! Is this right or just an opinion of a few? I'd appreciate some opinions if you care to make a response. THANKS
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Trouble with Reverse!!!
- Thread starter Tomline
- Start date
ottawa-rider
Member
Yes, when you shift to reverse the RPM is limited for the reasons you mentioned.
Similar threads
