Weave2u
New member
I was installing this today and ran into some problems. First off, I have the GIVI bag lights, and this request for :helpsmilie: is for anyone knowledgable about this application. I hate to seem like I'm :bdh: but this is really frustrating :gaah:
And yes I did :read: the instructions, such that they are. In a word... they SUCK!! and they have me
Anyway, complaining to them is just like :banghead:
here's the problem, the TP has three loose wires, the colors of which are wrong in the instructions, but I'm sure the :barf:'s at Custom Dynamics will never bother correcting it, and they are for this application. The instructions for the Givi bag lights explains to connect the + leads from the lights to these wires, which I did. One side worked fine, the other didn't work. I switched the leads and the otherside worked, but the opposite didn't. Now there is a black lead coming off the TP that is intended as a ground, but the connector attached to it is the straight in type, as opposed to the "tap in" style. If you've installed the TP along with the bags, please describe to me the specific wires you connected together. Thank you! LOL
Just to rant somemore about these PISS POOR instructions, there are TWO three wire connectors under the tail, there is only one on the TP. The instructions clearly say to connect the male and female three wire connector to THE three wire connector... Hello you doufuses!!! there are TWO, which one should we connect you idiots!!! <cough>... ok... that should do it for now... LOL, till I install the next Custom Dynamics DOG... roflmao
Thank you as usual for your help!! :2thumbs:
And yes I did :read: the instructions, such that they are. In a word... they SUCK!! and they have me

here's the problem, the TP has three loose wires, the colors of which are wrong in the instructions, but I'm sure the :barf:'s at Custom Dynamics will never bother correcting it, and they are for this application. The instructions for the Givi bag lights explains to connect the + leads from the lights to these wires, which I did. One side worked fine, the other didn't work. I switched the leads and the otherside worked, but the opposite didn't. Now there is a black lead coming off the TP that is intended as a ground, but the connector attached to it is the straight in type, as opposed to the "tap in" style. If you've installed the TP along with the bags, please describe to me the specific wires you connected together. Thank you! LOL
Just to rant somemore about these PISS POOR instructions, there are TWO three wire connectors under the tail, there is only one on the TP. The instructions clearly say to connect the male and female three wire connector to THE three wire connector... Hello you doufuses!!! there are TWO, which one should we connect you idiots!!! <cough>... ok... that should do it for now... LOL, till I install the next Custom Dynamics DOG... roflmao
Thank you as usual for your help!! :2thumbs: