TricLeD Wide Vu mirrors are simply AMAZING and now available for F3's

[Centurion]

I just installed two sets of these mirrors today; one set on a 2014 RT and one set on a 2016 F3 Limited. Installation only took a few minutes per set and the fit on both bikes is excellent. I took a test ride to see how the mirrors worked at speed and there was no noticeable vibration. The mirrors provide a greatly expanded field of vue to the rear and sides of the bike. Overall, I am very pleased with our purchase. Well done, Tricled!

 

[foxtail1]

Installed mine today. Easy installation and they fit my F3-S perfectly.

 

[Peteoz]

Well I received mine yesterday. Went to install this morning before my ride and found out that they will not fit the F3-T Limited. My mirrors a a bit larger than these add ons.

Thats odd, pwm, There's a photo of the F3T / F3L over mirrors on the TricLed site, and they fit perfectly. Sounds like you might not have the correct model over mirrors.

Pete

 

[Cindy-TricLED]

Thats odd, pwm, There's a photo of the F3T / F3L over mirrors on the TricLed site, and they fit perfectly. Sounds like you might not have the correct model over mirrors.

Pete

We already settled this.. my mistake that I shipped him the F3 model :joke:

 

[Peteoz]

We already settled this.. my mistake that I shipped him the F3 model :joke:

A mistake, Cindy??? From you ??? Now there's a first hyea:

Pete

 

[asp125]

GS/RS

Does anyone have a SIDE (edge) view of these on a GS/RS? I want to see how thick they are and how much they stick out compared to stock. Thanks

 

[Cindy-TricLED]

Does anyone have a SIDE (edge) view of these on a GS/RS? I want to see how thick they are and how much they stick out compared to stock. Thanks

ASP , the wide-vu mirror has a thin mold casing, so it will cover the side edge of you OEM mirror.

 

[Jim&Teresa]

Got mine on order....addicted to farkling - how to stop?

Yup, this thread "made me" order the TricLED Wide Vu mirrors! Yikes :yikes:, I am a farkleholic - first step is to admit it!
What is the cure to this addiction??? More farkles.... LOL

 

[currin20fan]

Mirrors

There are soooo many mods/farkles that we can add to our beloved Spyders....until now my #1 when asked by fellow ryders was my cup holders (I'm serious)...then early summer I watched Squared Away install the Wide-Vu mirrors that TricLED (Reggy and Cindy) have developed...but was on an RT...I ryde the F3...I was like soooo impressed but not available, as Reggy was still creating...well they are now available for the F3 and I ordered and received and installed (easy peasy...even I could do, once I realized they were directional :banghead::banghead:. Those mirrors are now my #1...you NEED THESE. Huge, huge improvement in visibility. NO blind spots...yep safety first and these mirrors do it...:thumbup::thumbup:

I ordered mine. That should be here today or tomorrow!

 

[KosherKid]

Any handy tips to make sure they line up perfectly the first time??

I don't want to have to peel them off if I miss.

 

[foxtail1]

Any handy tips to make sure they line up perfectly the first time??

I don't want to have to peel them off if I miss.

On the F3-S, they fit snuggly over the regular mirrors. There is no way you could put them on wrong.

 

[pwm]

We already settled this.. my mistake that I shipped him the F3 model :joke:

Yep top notch. Wanted a picture of my mirrors and I noticed the box part number did not match the invoice. Even on a Sunday. Can't ask for better service.

 

[Gator37]

Bought a set from Ann at Heart of Washington and got the stick ons off my RT with no problem. Such a difference and so easy to put on. :clap:

 

[MikeT]

Need Advice

I installed my RT Wide-Vu Mirrors today. Being left handed, I missed the exact alignment of the WVM on my right mirror by 1/8". Is there a way to "adjust" the WVM into perfect positioning, or should I just leave it alone???? I'm remembering the old saying "perfection is the enemy of good". Of course the left WVM is spot on.
Thanks for helping a perfectionist out
Mike

 

[Cindy-TricLED]

Yep top notch. Wanted a picture of my mirrors and I noticed the box part number did not match the invoice. Even on a Sunday. Can't ask for better service.

Received your return today!! thank you again... !! have a nice labor day weekend

 

[Cindy-TricLED]

Side view of TricLED wide-Vu for F3/RS/GS model

Does anyone have a SIDE (edge) view of these on a GS/RS? I want to see how thick they are and how much they stick out compared to stock. Thanks

As requested.. sorry it took a bit longer for me to get this.. and I don't know why these 2 pic rotated it self to the left..as the ones i upload were vertical.