TricLED Side Fender Lights

[Brian Kay]

Over the weekend I was finally able to install my Christmas present to myself, which was the amber front/side fender lights from TricLED. Easy enough installation, but for some reason I didn't have a good connection on the second side and had disassembled the splice connector clips... Unfortunately breaking the clip for the female receiver and butchering the male side due to clamping down. Anyway, in a pinch, I went to Napa Auto Parts to pick up some new connectors... way over priced compared to the options on eBay. :banghead: But I had to buy em, the temperature was in the 60's and the road was calling my name!

Just love those amber lights :yes:... really bright at night. It was a very nice addition or farkle if I may. That was my third purchased item from TricLED and very happy again!

Happy riding.

 

[Bob Denman]

:congrats: :nopic: :2thumbs:

 

[Brian Kay]

Certainly...

:congrats: :nopic: :2thumbs:

Here they are....oh yeah

 

[Bob Denman]

 

[jcspyder]

Over the weekend I was finally able to install my Christmas present to myself, which was the amber front/side fender lights from TricLED. Easy enough installation, but for some reason I didn't have a good connection on the second side and had disassembled the splice connector clips... Unfortunately breaking the clip for the female receiver and butchering the male side due to clamping down. Anyway, in a pinch, I went to Napa Auto Parts to pick up some new connectors... way over priced compared to the options on eBay. :banghead: But I had to buy em, the temperature was in the 60's and the road was calling my name!

Just love those amber lights :yes:... really bright at night. It was a very nice addition or farkle if I may. That was my third purchased item from TricLED and very happy again!

Happy riding.

Do you take the wheel off or the fender off to install these?

 

[Brian Kay]

Sho'nuff

Do you take the wheel off or the fender off to install these?

Yes, I had to take the wheel off to get to the 5 screws under the fender...once removed, connect the wires, tuck and tape the wires down and reassemble (as the directions tell you).

Good opportunity to scrub the dirt in the crevices and clean up the girl. I've named her KHAOS lol.

 

[jcspyder]

Yes, I had to take the wheel off to get to the 5 screws under the fender...once removed, connect the wires, tuck and tape the wires down and reassemble (as the directions tell you).

Good opportunity to scrub the dirt in the crevices and clean up the girl. I've named her KHAOS lol.

Thanks for the tip. Something I may do in the near future. I like the name too.

 

[Deanna777]

Here they are....oh yeah

Did you get the Red Fender LED's with the Safety Reflector Design ( for the front fenders facing the driver's feet)?

I also noticed that you have "1330 Triple" decal on the frunk. Looks great!

I have the Amber LED'S with Safety Reflector Design on my front Fenders + Red Fender LED'S with Safety Reflector Design on the front fenders facing the driver's feet, and I also have the Red LED'S on the saddle bags as Side Marker.

Yes, they are bright and very visible. So people can see you when coming up from behind. Also to let them know that their the Width of the Spyder. I bought them from TRIC-LED. They are Awesome folks :clap: Deanna

 

[Brian Kay]

Did you get the Red Fender LED's with the Safety Reflector Design ( for the front fenders facing the driver's feet)?

I also noticed that you have "1330 Triple" decal on the frunk. Looks great!

I have the Amber LED'S with Safety Reflector Design on my front Fenders + Red Fender LED'S with Safety Reflector Design on the front fenders facing the driver's feet, and I also have the Red LED'S on the saddle bags as Side Marker.

Yes, they are bright and very visible. So people can see you when coming up from behind. Also to let them know that their the Width of the Spyder. I bought them from TRIC-LED. They are Awesome folks :clap: Deanna

No, I didn't spend the money yet on the "red" ones. Maybe that will be my next christmas present, lol. And the saddle bag ones seem like a great idea too...yee ha!

Did you wire these as running lights only, pr get fancy and make them running / turn signal also?

Just the standard wiring, nothing special for the turn signals. BUT, again it sounds like a new farkle to add to the list. That coupled with the red fender reflector replacements sound like my next project...but need the "set" to be on sale. I've been dropping some bucks lately on this stuff, lol. Unless TricLED is reading this and wants to cut me a break on the Red reflectors with the turn signal wiring??? ray:

 

[Deanna777]

No, I didn't spend the money yet on the "red" ones. Maybe that will be my next christmas present, lol. And the saddle bag ones seem like a great idea too...yee ha! Brain Kay,

I posted pictures of my Red LED'S that are on my saddle bags on (post # 10 on the LED Venders Thread started by Wazoo on 2/28/16 @ 5:30 pm).
You will also see the Amber LED's that I have on the front fenders ( like yours). I also have the RED led's on the front fenders facing the drivers feet. I had my can-am dealer do the install of the LED'S. I like mine, and they are bright. I have my LED'S just running. Deanna



Just the standard wiring, nothing special for the turn signals. BUT, again it sounds like a new farkle to add to the list. That coupled with the red fender reflector replacements sound like my next project...but need the "set" to be on sale. I've been dropping some bucks lately on this stuff, lol. Unless TricLED is reading this and wants to cut me a break on the Red reflectors with the turn signal wiring??? ray:

I have my LED'S only running lights. Deanna

 

[Cindy-TricLED]

Thank you folks! We appreciate it and glad to hear you like our fender lights.




Sent from my iPhone using Tapatalk

 

[Cindy-TricLED]

Brian Kay, if you need more connectors on your next item with us, don't hesitate to send us an email.
I will send it to you , no need for Napa unless you need them "right now" [emoji16]
Thanks for your business. Make sure to order the Red led soon to complete the look!


Sent from my iPhone using Tapatalk

 

[bscrive]

I got these for my wife's F3. I also got the red rear facing ones, and the signal light option. I will be installing them as soon as I get time. Winter is still in full force here anyways.

 

[Deanna777]

Short money for added safety

:agree: and visibility I want to be seen on the road, not unseen. Deanna

 

[Brian Kay]

Brian Kay, if you need more connectors on your next item with us, don't hesitate to send us an email.
I will send it to you , no need for Napa unless you need them "right now" [emoji16]
Thanks for your business. Make sure to order the Red led soon to complete the look!


Sent from my iPhone using Tapatalk

Please send me some extra connectors, because I am about to add some more lights!!! Yes, thanks to your PM, I'm going to finish the look and get these fenders looking good.

 

[Brian Kay]

Tric-LED WOW

Are you kidding me... Ordered the red fender led's and blinker module on Saturday and boom, they arrived on Monday. Cindy, do you have an "in" with the post office? That's incredible service to get it out on Saturday, the day I ordered it!!! Kudos to you and thanks for giving me a good deal on the lights. I'll be sure to take some pictures and praise your products some more lol.

 

[cptjam]

TRIC

Reggy and Cindy Rock! Great people. Cool stuff.

 

[Brian Kay]

Reggy and Cindy Rock! Great people. Cool stuff.

And call me a liar, because I totally didn't wait until Christmas to buy the other lights... I ordered them on my birthday!!!:yes: My wife didn't get me a present, so I took matters into my own hands :roflblack:

 

[Brian Kay]

Let's get it ON!!!

Wish me luck.... I'm off to the garage to get these new LED's installed! Pictures to follow.

 

[Bob Denman]

Reggy and Cindy Rock! Great people. Cool stuff.

:agree: Actually; they're pretty much beyond mere "greatness"... :bowdown: