• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Tricle charger

lwrydr

New member
Yesterday I got a trickle charger from Habor Freight and am going to try and mate it to a plug-in that fits in the hole in the runk....hope it all works....
 
Yesterday I got a trickle charger from Habor Freight and am going to try and mate it to a plug-in that fits in the hole in the runk....hope it all works....

I picked up one too then saw that you should not use them with agm batteries. I have a bigger charger that can do agm but wanted a cheap dedicated charger. Not sure what the issue is.

Sent from my Nexus 7 using Tapatalk
 
I picked up one too then saw that you should not use them with agm batteries. I have a bigger charger that can do agm but wanted a cheap dedicated charger. Not sure what the issue is.

Sent from my Nexus 7 using Tapatalk

I give up, what is a "agm" battery and is that the one in the :spyder2:?
 
I picked up one too then saw that you should not use them with agm batteries. I have a bigger charger that can do agm but wanted a cheap dedicated charger. Not sure what the issue is.

Sent from my Nexus 7 using Tapatalk

:agree: Not for use with our batteries I have one. Should have gotten the Battery Tender Junior That has been talked about recently. Also if you plan on using the rear plug on the 2013 you have to change the fuse location in the fuse block to enable it to be on at all time.
It comes from the factory to work only with the key on. I believe it is mentioned in the owners manual.


http://www.dcbattery.com/agmtech.html

http://www.spyderlovers.com/forums/showthread.php?60521-Battery-Tender-Jr-20&highlight=battery
 
Last edited:
AGM means Absorbed Glass Mat. That is the type of battery in the Spyder. You should never use a standard "trickle charger" on a Spyder. Only a low amperage "smart" charger, also known as a maintainer or tender, should be used. One specifically meant for motorcycle use is your best bet. My favorites...Battery Tender Plus, battery Tender Jr., Accumate, Optimate, Xtreme, and Genius. You get what you pay for.
 
The one I bought is a maintainer so it should work (I hope).
Wanna bet your battery on it? Read the instructions if it like my HF tender it specifically says not for AGM batteries. This is one item you do not want to cheap out on.:thumbup:
 
Wanna bet your battery on it? Read the instructions if it like my HF tender it specifically says not for AGM batteries. This is one item you do not want to cheap out on.:thumbup:[

I don't want to play "bet my battery" on this but there is no mention of AGM anyplace. What it does say is "Only use on rechargeable lead-acid type batteries. Do not use on household, dry-cell batteries: explosion may result."

From reading about AGM I thought that they are an acid type battery but they work differently internally. I have now used up all my knowledge (or lack thereof) on this subject.
 
I don't want to play "bet my battery" on this but there is no mention of AGM anyplace. What it does say is "Only use on rechargeable lead-acid type batteries. Do not use on household, dry-cell batteries: explosion may result."

From reading about AGM I thought that they are an acid type battery but they work differently internally. I have now used up all my knowledge (or lack thereof) on this subject.

Seriously The Battery Tender Jr. can be found on amazon for ~$20 I had a choice like you I have probably the same unit from HF ( look online you should be able to get full specs) The electronics on these bikes can be very sensitive so I went with what is mentioned many times on the forum as being one of the best and glad I did. :thumbup: Your choice if you want to be a beta tester for Harbor Freight. Just sayin'....
 
Guess I will be the beta tester.....called HF techs and ask them and they looked it up in their books and told me it will work on a glass mat battery....some on has to try it....thanks for your input..
 
Really confused ??

I picked up 3 Cent-Tech automatic battery float chargers yesterday at Harbor Freight. Says use on fully charged 12 volt wet lead-acid batteries only. Is this the wrong one for Spyder?? :yikes: Going to use other ones on Can-Am ATV and Piaggio so should be no problem there. I thought Spyder battery was a wet-lead acid battery??
 
Opps :banghead::banghead: just read small print on back of package says not to use on AGM type battery so can't use will get one suggested above. :yes::yes:
 
Opps :banghead::banghead: just read small print on back of package says not to use on AGM type battery so can't use will get one suggested above. :yes::yes:

You will not be disappointed :thumbup: The transformer is 4X as big as the HF wall wart and heavy duty. It comes with a plug connector you can hook up to your jumper posts to easily connect and disconnect. It also comes with plain old clamps. Both of them plug and unplug from the 12ft unit cable. I added a cig plug adapter to my cart to go into the plug I added to my dash. $1.76.
 
AGM means Absorbed Glass Mat. That is the type of battery in the Spyder. You should never use a standard "trickle charger" on a Spyder. Only a low amperage "smart" charger, also known as a maintainer or tender, should be used. One specifically meant for motorcycle use is your best bet. My favorites...Battery Tender Plus, battery Tender Jr., Accumate, Optimate, Xtreme, and Genius. You get what you pay for.

The difference between the Jr and the Plus is the Plus is temperature sensitive and the Jr is not. If you storing in an unheated area go with the Plus
 
Guess I will be the beta tester.....called HF techs and ask them and they looked it up in their books and told me it will work on a glass mat battery....some on has to try it....thanks for your input..
Can you post a link to the HF product page or a picture of the charger? If it is the one I have it really does say not to use for AGM on the instructions. If they have another one, I'd like to find it.
 
Picture

Can you post a link to the HF product page or a picture of the charger? If it is the one I have it really does say not to use for AGM on the instructions. If they have another one, I'd like to find it.

Attached is a pic of the charger.


PB240001.jpgPB240002.jpg
 
HF charger

I have used the same HF battery maintainer that Lwrydr has pictured for over a year without any problems. It works very well. I adapted a plug for use in the trunk outlet of my 2012 RTs.
 
I have used the same HF battery maintainer that Lwrydr has pictured for over a year without any problems. It works very well. I adapted a plug for use in the trunk outlet of my 2012 RTs.

How did you adapt it? I seem to be having a problem with that. Thanks for any help.
 
I have used the same HF battery maintainer that Lwrydr has pictured for over a year without any problems. It works very well. I adapted a plug for use in the trunk outlet of my 2012 RTs.
But for $4 more the AMERICAN made Battery Tender Junior comes with the adapter. As I said this is one thing I will not trust Chinese with. 90 day vs. 5yr warranty doesn't hurt either:thumbup:
 
Back
Top