Spyderdale
New member
How difficult to change over to the tri axis on a 2013 RT ? Just curious as thinking about getting one.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Tri axis handlebar
- Thread starter Spyderdale
- Start date
3 Wheel Addict
New member
Santa brought me a set and the instructions that came with them look pretty involved. Looks like everything including the complete dash pod needs to come off. Seems straight forward but do not attempt without a service manual. Dealer told me 5hr to install but I'm doing it myself.
Purple Guy
New member
From past posts it's about a 6 hour job if you know your way around your Spyder.
Bob Denman
New member
I believe that Lamont posted a video about it..
READ, RE-READ, and RE-RE-READ your instructions before tackling this project! :2thumbs:
READ, RE-READ, and RE-RE-READ your instructions before tackling this project! :2thumbs:
ornerydog7
New member
jcthorne
Well-known member
I've done one set on my bike and the reports are right. Took me better than 8hrs taking my time. Doing Louise bike should go faster now that I know where I am going. Its a big job though. The bars are very nice once installed and helped my riding position quite a bit. For most that go with the comfort seat, the stock bars are too far forward unless you have pretty long arms.
