Tire Pressure sensors

[AndyIsRiding]

I have been investigating using a tire sensor so I know my tire pressures are where I want them to be.

I have been looking at different systems.

I was looking at using this system, with ride-on to balance the weight of the sensor.
http://www.advantagepressurepro.com/index.asp?PageTypeId=3&PageDetailId=155
anybody tried these?
Any of our sponsors can give me an opinion?

Looks like a good way of keeping tire pressure monitored.

 

[Gordy]

if you instal sensors on your valve stems instal metal stems the weight of the sensors will break off the rubber valve stem.This happened on my daughters yamaha and have heard it happened to others.have not used the brand you mentioned sorry

 

[Bob Denman]

This looks like a very interesting system... you have picqued my interest and my Missus is hiding the credit cards!

 

[SpyderWolf]

Can't you just get the valve stem caps that display the current tire pressure on them? Then you wouldn't have to worry about causing any real harm. I will admit though that I have never used these and have no idea whether they are accurate or not. :dontknow:

 

[Sny]

I found these on ebay...
http://cgi.ebay.com/ws/eBayISAPI.dl...27+&clk_rvr_id=243649603656&item=290452084527

cheap! the 26psi version will be green at 26psi, yellow at 21psi and red at 16psi... Seems useful for the price ($6.30 w/free shipping)

 

[AndyIsRiding]

I found these on ebay...
http://cgi.ebay.com/ws/eBayISAPI.dl...27+&clk_rvr_id=243649603656&item=290452084527

cheap! the 26psi version will be green at 26psi, yellow at 21psi and red at 16psi... Seems useful for the price ($6.30 w/free shipping)

Looked at those, but lowest is 26psi and become less reliable the farther away you are from your set press.

I use 18 in front so it would always be between yellow and red.

Only good for the rear tire at 28psi.

 

[boborgera]

Call me old fashion but i just use a air gage':dontknow: