These push pins work for panels?

[acdcking12]

Bought these, but look a bit different

And can't get them to work

Will these work?

 

[JayBros]

Your photo appears to me to show only one piece. Spyder push pins have two pieces like the ones in the top row of this link:https://www.amazon.com/GOOACC-Retainer-Plastic-Fasteners-Chrysler/dp/B07L6FJGR4/ref=asc_df_B07L6FJGR4/?tag=hyprod-20&linkCode=df0&hvadid=331836203478&hvpos=1o1&hvnetw=g&hvrand=18403760065118591566&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9009980&hvtargid=pla-653030689150&psc=1.

 

[VitoNam]

I use these and are as close as I've found to what BRP uses, and a LOT less expensive: https://www.ebay.com/itm/100-pcs-8-...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

[acdcking12]

I ordered those on ebay. thank you

 

[VitoNam]

I ordered those on ebay. thank you

You are welcome! Those push pins are the best deal going, so it's easy/cheap to replace one you might have screwed up lifting those suckers out. With the proper tool even.

 

[Tec35]

You can also grab them on Amazon
100 PACK - Premium Venom Brand... https://www.amazon.com/dp/B07W627S5F?ref=ppx_pop_mob_ap_share

 

[VitoNam]

Thanks for the info. It's always good having more than one source to choose from. Premium VENOM. Gotta love that name!

 

[carbonation]

Push pin pliers can help remove them without damage, but it is really nice to have spares on hand.
https://www.harborfreight.com/push-pin-pliers-63700.html?cid=paid_google|||63700&utm_source=google&utm_medium=cpc&utm_campaign=&utm_content=&gclid=Cj0KCQiA7aPyBRChARIsAJfWCgIhVnvbMERCJ3f5sObEe3TYluFzuSqHdZgFWd3Zj6DDST1Y1ohvXCEaArwBEALw_wcB

 

[VitoNam]

Here's another handy push pin tool that works well. For the one I have, I modified the tool's head by grinding down the flanges, on either side of the opening, leading down to the shank just a bit. It reconfigured the overall shape of the head. For me, I found the tool works better that way getting under those pesky pins.