THE SEAL F3 IS FINALLY HERE!!!

[sealfloorboards]

It's taken almost a year, what with medical problems, moving my shop and home, but yesterday, with the help of my good friend Michael and Travis at ProCaliber Super Sports in Vancouver, Wa., we made the final fitting of the F3 SE6 DLX Seal Floorboards. It fit perfectly and I'm ready to offer them to all you F3 Spyder riders. You can call me directly or email me and I'll get back to you to order. As an introductory promo, I giving FREE FREIGHT ($45.) thru May. the price is $500. These bad boys are huge and even the tallest can really stretch out on those long rides. Mounting and dismounting is much easier than with the pegs. Installation is a breeze with only 3 nuts and bolts per side. Should take about 10 to 15 min. per side, no "rocket science" required. It will be a couple of days before you can order thru my website, but I'm always happy to talk with you personally and answer what questions you might have. Riding season is here, so let's get out and.....Ride in comfort.

 

[PrairieSpyder]

I'm glad you're back at it and hope you medical issues are all resolved.

 

[sealfloorboards]

I'm glad you're back at it and hope you medical issues are all resolved.

Thanks for your concern. June 9th I will have a complete shoulder replacement with a new socket and ball on the end of my arm. I'm afraid it's going to put a big hole in this summer's Spyder riding. Hoping to be up for the Red Rock Rally in Sept.

 

[Bob Denman]

Hi John!
The best of luck to you with the upcoming "renovations" to your shoulder. :thumbup:
Question: How do these floorboards work with the adjustable pedal position of the U-Fit System?
(They look GREAT! :clap

 

[ARtraveler]

Hoping you get healed up quickly once the "renovations" to the shoulder have been completed. Thoughts and ray:ray: go with you my friend.

PS: nice floorboards for the F3. :bowdown::firstplace:

 

[sealfloorboards]

Hi John!
The best of luck to you with the upcoming "renovations" to your shoulder. :thumbup:
Question: How do these floorboards work with the adjustable pedal position of the U-Fit System?
(They look GREAT! :clap

The factory has pre set the brake pedal to #3. Shawn, at ProCaliber tells me that almost everyone leaves it there. That's what I designed them to. He tells me that only the very tall or very short are changing them and almost never to the #1 or #5 settings. Based on his advice, that's what I've done. Set them to #3. As Henry Ford once said "You can have any color you want as long as it's black" I'm looking to serve the most people I can without getting crazy complicted.

 

[Chupaca]

Good to know...

Glad your up and running once again and coming out with a fine looking board for the F3. Good luck if you can use it but I see this going well for you....:2thumbs:

 

[sealfloorboards]

I'm hoping to have it up and poster on my website by Wed. Then you F3 riders can order right off my website. Until then, you can call or email me. Remember, thru May, I'm shipping them free here in the Continental US..
Ride in comfort

 

[IdahoMtnSpyder]

This doesn't have to do with your floorboards, but one of your products helped bring some laughs. Two years ago at the end of my one year term as President of the the local Lions Club I was regaled by a poem. In it were these words:

The story goes down hill from here on
He now has a backwards tricycle to ride on.

Oh boomers, oh boomers, this is so sad.
How can a three-wheeler be "bad".

But this is the choice of our treasured talker
We hope we do not see the ride fitted with a walker.

Imagine the hilarity that ensued at the next lunch meeting when I brought out this picture! :roflblack:

 

[sealfloorboards]

Ah, the wonderful Seal Tote/golf/walker set. I used one myself as a "walker hauler" when I had my knee replaced. Today, I'm much happier carrying golf clubs or a carry on suite case for those weekend trips.
Ridin' in comfort,

 

[Peteoz]

The factory has pre set the brake pedal to #3. Shawn, at ProCaliber tells me that almost everyone leaves it there. That's what I designed them to. He tells me that only the very tall or very short are changing them and almost never to the #1 or #5 settings. Based on his advice, that's what I've done. Set them to #3. As Henry Ford once said "You can have any color you want as long as it's black" I'm looking to serve the most people I can without getting crazy complicted.

What a shame Shawn wasn't 6'6". I bet he wouldn't have recommended position 3 then:helpsmilie:. Here I was thinking I had found the perfect solution to getting enough legroom on a Spyder (not even close on an RT), and the Seal boards are limited to one position on the F3. Bugger.......but I realise you had to market to the majority. I wonder if I could learn to brake with my heel and ride with my feet right up the front of the Seal boards on an RT?

I hope the shoulder reconstruction has been successful.:thumbup: .