Tank protector

[Gilda]

I purchased some 3M 1080 carbon fiber look vinyl and applied it myself. I used cutting tape (removeable) to designate the coverage area, applied the vinyl 'wet' then used the cutting tape to make clean edges. A little heat to the vinyl set it nicely. I used one piece from the key area down to the front of the seat.

Thanks for the info. I'll try this.

 

[Spyder Wraps Pete]

NEW F3 Tank Protector in Real Carbon Fiber

In addition to our textured carbon fiber and clear paint protection film we now have our NEW F3 tank protector available in the same material out dash kits are produced out of. In this photo you will see we installed a piece of Red vinyl on the tank before applying the new F3 Spine tank protector in our real carbon fiber. These will be available in all of our current dash kit color options. These are available on our website here.

 

[Tazzel]

In addition to our textured carbon fiber and clear paint protection film we now have our NEW F3 tank protector available in the same material out dash kits are produced out of. In this photo you will see we installed a piece of Red vinyl on the tank before applying the new F3 Spine tank protector in our real carbon fiber. These will be available in all of our current dash kit color options. These are available on our website here.

View attachment 134393View attachment 134394View attachment 134395View attachment 134396

Still does not cover where needed. On the sides where your thighs touch the tank

 

[Michaelscs]

:agree:

 

[KID Ryker]

Good Job

View attachment 117628 Here's a few pics View attachment 117629

:thumbup:

 

[StanTheMan]

I have this and my thoughts...

In addition to our textured carbon fiber and clear paint protection film we now have our NEW F3 tank protector available in the same material out dash kits are produced out of. In this photo you will see we installed a piece of Red vinyl on the tank before applying the new F3 Spine tank protector in our real carbon fiber. These will be available in all of our current dash kit color options. These are available on our website here.

View attachment 134393View attachment 134394View attachment 134395View attachment 134396

I have the F3 Spine Tank Protector and I'm happy with the result. It sufficiently protects the main exposed area of the tank. It's a good compromise between style and protection. I agree, if you are concerned about protecting all areas in contact with your pants, you will need to protect pretty much your entire tank and some of your side panels.

 

[Tango]

Mine is on order. Patiently waiting. :thumbup: Tom :spyder:

 

[Spyder Wraps Pete]

Dash kit and tank protector combo

With this new carbon fiber tank protector and our F3 carbon fiber dash kit you can have a carbon fiber theme from your seat all the way to the gauges.

 

[Spyder_Cowgirl]

Protector

So I noticed the other day in the sun, my jacket seems to be starting to scratch the black tank right where it meets the seat front. BRP does not carry a protector sticker for that area on the F3, nor will they next year. Anyone have any other source for a clear plastic sticker type protector I can custom fit for that area?

Check out "See Through Braz" --- may not have something, but might sell the raw material for a small fee. They just did a custom fit for my husbands Indian Roadmaster front fender.

Here is a link: http://www.seethroughbraz.com/


All the best ..... Ann