Tailight Flasher

[Eckhard]

Hi:

A Newbie here wondering if I can install tail light flashers on my 2011 RT. Got a Back Off module available for the install.

TIA

 

[Dmetcalf]

Brake light modulator

I installed a brake light modulator on mine and was an easy install. I purchased it from Spyderpops I believe. It was plug and play easy.

 

[ARtraveler]

Cannot help with the install information. A good safety device--IMO.

I had a Yosimite Sam Back Off mudflap on my Venture. Even had a Highway Patrol stop me to admire it up close. I was good to go in MN. :yes:

 

[BlueBug]

flashers/strobes from Custom Dynamics

Hi:

A Newbie here wondering if I can install tail light flashers on my 2011 RT. Got a Back Off module available for the install.

TIA

Got a 3rd running/tail/brake light from Custom Dynamics. Wwrks great. TEN different patterns.

 

[pjweimer]

Here's a link to the Gear Brake unit that I installed on our 2014 RT Ltd. Its been working great for three years now. I also installed TricLEDs high brake light and their strips on the inside vertical edge of the bags and at the interface of the truck lid and base. Flashes them all.

https://gearbrake.com/collections/shop/products/brake-light-flasher-module

 

[cptjam]

Yes. TRIC led has a plug and play module.

 

[spyder01]

Here's a link to the Gear Brake unit that I installed on our 2014 RT Ltd. Its been working great for three years now. I also installed TricLEDs high brake light and their strips on the inside vertical edge of the bags and at the interface of the truck lid and base. Flashes them all.

https://gearbrake.com/collections/shop/products/brake-light-flasher-module

I just put a gear brake module on and the cool thing about this brand is that when you push the brake pedal you get that flasher action but lets say you just back off the gas real fast or downshift for a turn it senses your decell and flashes the brake lites so cars behind you know your slowing down before you even hit the brake pedal.

 

[retgi]

I just put a gear brake module on and the cool thing about this brand is that when you push the brake pedal you get that flasher action but lets say you just back off the gas real fast or downshift for a turn it senses your decell and flashes the brake lites so cars behind you know your slowing down before you even hit the brake pedal.

Did you get their universal one since I don't see an application for the spyders and did you have to get one for each tail light? If not, where'd you wire it in? Sorry, just got this F3T a few months ago and haven't been into it yet...

 

[Bart]

I just sent that same question to their email support. Guess we'll see if they respond.

 

[Easy Rider]

did you have to get one for each tail light? If not, where'd you wire it in? ...

An important clarification needs to be made here.
You do NOT want to flash the TAIL LIGHTS. That would be impractical and illegal.
It is the BRAKE LIGHTS that flash when first applied......and then usually go steady after a few flashes.

 

[jlc41]

Bart, I like the slogan on your avatar.
Joe