Sypder Wheels

[DrewNJ]

very good to hear...:thumbup:

 

[YIRYDE]

ok I just checked the new 2013 wheels to see if they fit on my 2011 rt limited and....:yes::yes:yes they do fit. There is about 1 1\2 inches between the rim and the caliper. I ordered the new black graphite (I think that's what brp calls it) but I am having these powder coated orange rear wheel and sprocket getting done as well. I will post pics next week when i get these back and installed.

Thanks for taking the time to do this.

 

[mellowcmb]

Thank you so much!! So can I assume that the RSS will apply to this as well? I noticed it was tested on a RT. Thanks everyone!!! I have waited a long time for this great news......YES. Hope this pertains to the RSS as well.

 

[SGSpyderGirl]

im guessing the 2011's have a similar wheel set up to the 2008's then?

 

[spyderrock]

Im not sure about the Rss but in the brp accessories book it states that all 2013 wheels fit All prior model years. If you are interested in a set of 15 inch wheels just ask your dealer that if they dont fit that you can return them for a full refund. I haven't got my wheels back from the powder coaters yet when i do I will post some pics. The waiting is killing me...

 

[BLUEKNIGHT911]

DIFFERENT WHEELS

If you can't LIVE without different wheels.......you can get someone to make you " ADAPTORS " for your front hubs / spindles at a fairly reasonable cost......However dealing with the " NANNY " may be a real problem and not left to amateurs unless they have deeeeeeeeeeeeeeep pockets.....Mike :thumbup:

 

[Bob Denman]

Mike,
You're just the guy with the talent to make those adapters... :thumbup:
Question:
How "thin" can they be made, and still be strong enough to stay together?
There's about a 2" difference in the width of the GS/RS/ST models, and the RTs... Could an adapter be made to keep the overall width of the bikes within the RTs specs?
oh! It shouldn't bother Nanny at all... :2thumbs:

 

[MuGGzy]

I don't know what the actual hole pattern is but I was thinking about looking at wheels for one of the new "mini" cars, like the Fiats or Smart Cars, I know there are some nice rims being made for those but I have no clue if the hole pattern or offset would be compatible.

I am looking at tires in the same realm, I want to go to something with a lower profile on the stock rims.

 

[Bob Denman]

Wheels off of a Smart, or a 500? :shocked:
That seems like a step backwards! :roflblack:
Now if they were off of a Lambo, a 'Benz or a Beemer; :thumbup: